JVC KW-NSX1 - Smartphone Adapter Unit Specifications; USB and Bluetooth Specifications; Monitor and General Specifications

72
ENGLISH
BLUETOOTH
Version Bluetooth 2.0 certified
Output Power +4 dBm Max. (Power class 2)
Service Area Within 10 m (10.9 yd)
Profile HFP (Hands-Free Profile) 1.5
OPP (Object Push Profile) 1.1
A2DP (Advanced Audio Distribution Profile) 1.2
AVRCP (Audio/Video Remote Control Profile) 1.3
PBAP (Phone Book Access Profile) 1.0
MONITOR
Screen Size 6.1 inch wide liquid crystal display
Number of Pixel 1 152 000 pixels: 800 (horizontal) × 3 (RGB) × 480 (vertical)
Drive Method TFT (Thin Film Transistor) active matrix format
Color System NTSC/PAL
Aspect Ratio 16:9 (wide)
GENERAL
Power Requirement Operating Voltage DC 14.4 V (11 V to 16 V allowance)
Grounding System Negative ground
Allowable Storage Temperature –10°C to +60°C (14°F to 140°F)
Allowable Operating Temperature 0°C to +40°C (32°F to 104°F)
Dimensions (W × H × D) Installation Size (approx.) 182 mm × 111 mm × 160 mm
(7-3/16” ×4-3/8” × 6-5/16”)
Panel Size (approx.) 188 mm × 117 mm × 10 mm
(7-7/16” × 4-5/8” × 7/16”)
Mass (approx.) 2.3 kg (5.1 lbs) (including the Trim plate and
Sleeve)
KS-NSX1 (SMARTPHONE ADAPTER unit)
USB
USB Standards USB 2.0 Hi Speed
Data Transfer Rate Hi Speed Maximum 480 Mbps
Compatible Device CDC NCM Subclass (MirrorLink supported smartphone)
Max. Current DC 5 V
500mA
GENERAL
Power Requirement Operating Voltage DC 14.4 V (11 V to 16 V allowance)
Grounding System Negative ground
Allowable Storage Temperature
–10°C to +60°C (14°F to 140°F)
Allowable Operating Temperature
0°C to +40°C (32°F to 104°F)
Dimensions (W × H × D) 164 mm × 34 mm × 109 mm
(6-1/2” × 1-3/8” × 4-5/16”)
Mass (approx.) 650
g (1.6 lbs)
Design and specifications are subject to change without notice.
If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.
EN_KW-NSX1[J].indb 72EN_KW-NSX1[J].indb 72 12/04/23 16:2312/04/23 16:23