14
Use Voice Recognition
1
Press and hold .
The connected phone (which has been paired the earliest) is activated. However,
if priority device is connected, pressing and holding
activate the priority
device.
( 15, PRIORITY)
2 Speak the name of the contact you want to call or the voice command to
control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the instruction
manual of the connected phone for details.
•
This unit also supports the intelligent personal assistant function of iPhone.
Select a contact by name
• You can search through the contacts quickly according to the first letter (A to Z, 0 to
9, and OTHERS).
• “OTHERS” appears if the first character is other than A to Z, 0 to 9.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select
[PHONEBOOK]
, then press the knob.
3 Press J / K to select the desired letter.
4 Turn the volume knob to select a name, then press the knob.
5 Turn the volume knob to select a phone number, then press the knob to call.
To return to the previous setting item or hierarchy, press PTY.
Store a contact in memory
You can store up to 6 contacts.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select
[RECENT CALL]
,
[PHONEBOOK]
, or
[DIAL NUMBER]
, then
press the knob.
3 Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone number.
4 Press and hold one of the number buttons (1 to 6).
“MEMORY P(selected preset number)” appears when the contact is stored.
To erase a contact from the preset memory, select
[DIAL NUMBER]
in step
2
and store
a blank number.
BLUETOOTH®
Make a call from memory
1
Press to enter Bluetooth mode.
2 Press one of the number buttons (1 to 6).
3 Press the volume knob to call.
“NO PRESET” appears if there is no contacts stored.
Delete a contact
Not applicable for mobile phone that supports PBAP.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select
[RECENT CALL]
or
[PHONEBOOK]
, then press the knob.
3 Turn the volume knob to select a contact or a phone
number.
4 Press and hold PTY.
5
Turn the volume knob to select
[DELETE]
or
[DELETE ALL]
,
then press the knob.
DELETE
: Selected name or phone number in step 3 is
deleted.
DELETE ALL
: All names or phone numbers from the
selected menu in step
2 is deleted.
6 Turn the volume knob to select
[YES]
or
[NO]
, then press
the knob.
Bluetooth mode settings
1
Press and hold MENU.
2 Turn the volume knob to select
[BLUETOOTH]
, then press
the knob.
3 Turn the volume knob to make a selection
( 15)
, then
press the knob.
4 Press MENU to exit.
To return to the previous setting item or hierarchy, press
PTY.
To Next Page
Loading...
