To Next PageTo Next PageWhat to do if JVC Car Receiver shows 'CANNOT PLAY'?
If your JVC Car Receiver displays 'CANNOT PLAY', ensure your Android device contains playable audio files. Try reconnecting the Android device, or restart the Android device.
Why is the sound intermittent on my JVC Car Receiver?
If you experience intermittent playback or sound skipping on your JVC Car Receiver, turn off the power saving mode on your Android device.
What to do if 'MISWIRING CHECK' appears on JVC KW-R925BTS Car Receiver?
If the message 'MISWIRING CHECK' appears on your JVC Car Receiver, turn off the power. Then, carefully inspect the speaker wire terminals to ensure they are properly insulated. After checking, turn the power back on.
Why can't I playback in AUTO MODE on my JVC Car Receiver?
If you cannot playback at AUTO MODE on your JVC Car Receiver, ensure that the JVC MUSIC PLAY APP is installed on your Android device. Also, reconnect the Android device and select the appropriate control mode. If the problem continues, the connected Android device may not support [AUTO MODE].
What does 'CHK ANTENNA' mean on JVC Car Receiver?
Check that the antenna and its connection are in good condition.
How to eject a disc from JVC Car Receiver when it's stuck?
If your JVC Car Receiver is not ejecting the disc, press and hold to forcibly eject it. Take care not to drop the disc once it's ejected.
Why is there no sound during playback on my JVC KW-R925BTS?
If there's no sound during playback on your JVC Car Receiver, try these steps: 1. Reconnect the Android device. 2. If in [AUDIO MODE], launch any media player application on the Android device and start playback. 3. If in [AUDIO MODE], relaunch the current media player application or use another media player application. 4. Restart the Android device. 5. If the problem persists, the connected Android device may be unable to route the audio signal to the unit.
General| Brand | JVC |
|---|---|
| Model | KW-R925BTS |
| Category | Car Receiver |
| Language | English |
Instructions to set the current time on the unit.
Configuration of essential system settings like beep and source selection.
Instructions on how to find radio stations using automatic or manual tuning.
Describes automatic source switching and playback initiation.
Guide to begin listening to iHeartRadio through the unit.
Connecting the SiriusXM Vehicle Tuner and checking Radio ID.
Steps to select and tune into SiriusXM channels.
Step-by-step guide to pair a new Bluetooth device with the unit.
Automatic pairing process when connecting iPhone/iPod touch/Android via USB.
How to handle incoming calls, including answering and rejecting.
Instructions for answering an incoming call.
Instructions for rejecting an incoming call.
How to end an active call.
Instructions on making calls via call history, phonebook, or dialing.
Configuring Bluetooth modes like phone connection, audio, and application.
Using voice commands to make calls or control phone functions.
Saving contacts to preset memory buttons for quick dialing.
Configuring settings for incoming calls like auto-answer and ring color.
How to make calls using stored contacts in memory.
Adjusting settings to improve call quality.
Checking the compatibility of Bluetooth profiles between the device and unit.
Operating the Bluetooth audio player for playback control.
Choosing from various EQ presets like FLAT, ROCK, POP, etc.
Step-by-step guide for installing the unit into the car dashboard.
Visual guide and wiring diagram for connecting the unit.
