JVC KW-R935BTS

ENGLISH
29
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DISPLAY SETTINGS
Zone identification for brightness setting
1 Press and hold .
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected/
activated or follow the instructions stated on the
selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default: XX
DISPLAY
DIMMER
Dim the illumination.
OFF :Dimmer is turned off. Brightness changes to [DAY] setting.
ON :Dimmer is turned on. Brightness changes to [NIGHT] setting. ( [BRIGHTNESS])
DIMMER TIME
:Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default:
[ON] : PM6:00 ; [OFF] : AM6:00 )
DIMMER AUTO :Dimmer turns on and off automatically when you turn off or on the car
headlights.
*
1
BRIGHTNESS Set the brightness for day and night separately.
1 DAY / NIGHT :Select day or night.
2 Select a zone ( see illustration on the left column ) .
3 LEVEL 00 to LEVEL 31 : Set the brightness level.
TEXT SCROLL
*
2
SCROLL ONCE :Scrolls the display information once.; SCROLL AUTO :Repeats scrolling at
5-second intervals.;
SCROLL OFF :Cancels.
COLOR
PRESET
Select illumination colors for the buttons on different zones separately.
1 Select a zone ( see illustration on the left column ).
2 Select a color for the selected zone.
•
COLOR 01 to COLOR 49
• USER : The color you have created for [DAY COLOR] or [NIGHT COLOR] is shown.
•
COLOR FLOW01 to COLOR FLOW03 : Color changes at different speeds.
•
CRYSTAL / FLOWER / FOREST / GRADATION / OCEAN / SUNSET / RELAX : The selected color
pattern is shown.
*
3
(Selectable only when [ALL ZONE] is selected in step 1 .)
*
1
The illumination control wire connection is required. ( 39)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3
If one of these color pattern is selected, the [ZONE 1] and [ZONE 2] illumination colors will change to the default
colors.
Zone identification for color setting
JS_JVC_KW_R935BTS_K_EN_7.indd 29JS_JVC_KW_R935BTS_K_EN_7.indd 29 7/4/2017 2:45:47 PM7/4/2017 2:45:47 PM