JVC KW-R940BTS - Audio Settings; Select a preset equalizer directly; Store your own sound settings

28
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Audio Settings
Start listening
While in Alexa idle state...
1 Press on the unit to activate Alexa.
The display shows: “LISTENING...”.
2 Communicate with Alexa via the connected microphone. (Page19)
3 During music playback in ALEXA source, you can perform the
following operations:
To On the faceplate On the remote control
Play back/pause Press the volume knob.
Press d.
Reverse skip/
Forward skip
Press S / T. Press H / I.
During music playback, press
to pause the music and activate Alexa. You
can now start to communicate with Alexa.
AMAZON ALEXA
Select a preset equalizer directly
Press EQ-BASS repeatedly.
(or)
Press EQ-BASS , then turn the volume knob within 5seconds.
Preset equalizer:
[FLAT] (default)/ [DRVN3] / [DRVN2] / [DRVN1] / [HARDROCK] / [HIPHOP] / [JAZZ] / [POP] /
[R&B] / [USER] / [CLASSICAL]
• Drive equalizer ( [DRVN3] / [DRVN2] / [DRVN1] ) boosts specific frequencies in
the audio signal to reduce the noise heard from outside the car or running
noise of the tyres.
Store your own sound settings
1
Press and hold EQ-BASS to enter [EASY EQ] setting.
2 Turn the volume knob to select an item, then press the knob.
Refer to [EASYEQ] (page 29) for setting and the result is stored to [USER] .
• To return to the previous setting item, press
.
• To exit, press EQ-BASS.
JS_JVC_KW_R940BTS_K_EN_3.indd 28JS_JVC_KW_R940BTS_K_EN_3.indd 28 8/8/2019 1:44:09 PM8/8/2019 1:44:09 PM