JVC KW-V330BT - Page 55

ENGLISH 55
BLUETOOTHBLUETOOTH
Using a Bluetooth mobile phone
❏ Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• Phone operation is not available while the
picture from the rear view camera is displayed.
(Page48)
To reject a call
When <Auto Response> is set to [ON] (Page60)
The unit answers incoming calls automatically.
❏ Ending a call
While talking...
❏ Adjusting the volume of calls/earpiece/
microphone
While talking...
• You can adjust the volume level between –10 to
10 (initial: –4).
• Use the monitor panel to adjust the call/earpiece
volume. (Page7)
❏ Switching between handsfree mode
and phone mode
While talking...
Each time you press the button, the talking method
is switched ( : handsfree mode / : phone
mode).
❏ Adjusting the noise reduction/echo
cancel level
While talking...
• To adjust the noise reduction volume (between
−5 to 5, initial: 0) : Adjust <NR LEVEL>.
• To adjust the echo volume (between −5 to 5,
initial: 0): Adjust <EC LEVEL>.
2017KW-VEntryK.indb552017KW-VEntryK.indb55 2016/12/0915:112016/12/0915:11