JVC KW-V330BT - Page 56

56
BLUETOOTHBLUETOOTH
❏ Sending text during a call
You can send text during a call using the DTMF (Dual
Tone Multi Frequency) function.
While talking...
❏ Switching between two connected
devices
You can change the device to use in the following
situations:
• When 2 devices are connected
• While in phone control screen
• The active device is highlighted.
❏ Making a call
1 Display the phone control screen.
On the Home screen:
KW-V330BTKW-V230BT KW-V430BT
KW-V630BT
• You can also display the phone control screen
as follows:
– For KW-V230BT : Select [Phone] on the pop-
up short-cut menu (Page12).
– For KW-V330BT /KW-V430BT /KW-V630BT :
Select [ ] on the pop-up short-cut menu
(Page12).
2 Select a method to make a call.
1
2
3
4
5
1
From the call history*
2
From the phone book*
3
From the preset list
• To preset, see page58.
4
Direct number entry
5
Voice dialing
• You can display the <Bluetooth Setup>
screen by pressing [ ].
* When the mobile phone is not compatible with Phone Book
Access Profile (PBAP), the call history and the phone book are not
displayed.
2017KW-VEntryK.indb562017KW-VEntryK.indb56 2016/12/0915:112016/12/0915:11