To Next PageTo Next PageWhy is the sound sometimes interrupted in my JVC KW-XC777?
If the sound is being interrupted, the connections may not be good. Check the cords and connections to ensure they are properly connected.
What does “RESET 8” mean on my JVC KW-XC777 display?
If your JVC Car Receiver displays “RESET 8”, it indicates that the unit is not correctly connected to a CD changer. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
What to do if my JVC KW-XC777 Car Receiver does not work at all?
If your JVC Car Receiver is not working at all, the built-in microcomputer may be malfunctioning due to noise or other factors. Press the reset button on the front panel.
What to do if CD can neither be played back nor ejected on my JVC Car Receiver?
If your JVC Car Receiver won't play or eject a CD, it could be malfunctioning. Try pressing and holding both the /ATT and CD 0 buttons at the same time for several seconds to resolve this issue.
Why there is no sound from the speakers of my JVC KW-XC777?
If you can't hear any sound from the speakers of your JVC Car Receiver, first, make sure the volume isn't set to the minimum. If it is, adjust it to a comfortable listening level. Also, verify that all cords and connections are correctly and firmly in place.
How to fix JVC Car Receiver when it does not work at all?
If the unit isn't working, the built-in microcomputer may be malfunctioning due to noise or other factors. Press the reset button on the front panel .
What does “RESET 8” mean on JVC KW-XC777 Car Receiver display?
The “RESET 8” message indicates that the unit is not connected to a CD changer correctly. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
What does “EJECT ERR” mean on my JVC KW-XC777 Car Receiver display and how to fix it?
The “EJECT ERR” message appears when the CD ejection or insertion was interrupted. To clear the message, press CD 0, or press both the /ATT and CD 0 buttons together.
General| USB Port | Yes |
|---|---|
| Aux Input | Yes |
| Radio Tuner | AM/FM |
| Preamp Voltage | 2.5 V |
| Number of Channels | 4 |
| CD-R Playback | Yes |
| CD-RW Playback | Yes |
| Remote Control | Yes |
| Subwoofer Output | Yes |
| DIN Size | 2 DIN |
| Supported Audio Formats | MP3, WMA |
| AM/FM Presets | 18 FM, 6 AM |
| EQ Settings | Yes |
Main title indicating the document is a set of instructions.
Section for recording model and serial numbers for future reference.
FCC compliance information regarding digital device operation and interference.
Safety warnings for Class 1 laser product operation and servicing.
Warning about adjusting volume levels to prevent speaker damage.
Instructions for resetting the unit using a ball-point pen.
Identification and explanation of buttons and indicators on the main unit's control panel.
Explanation of symbols and information shown on the unit's display screen.
Description of functions for each button on the remote control.
Step-by-step guide for inserting and securing the remote control battery.
Instructions on turning the unit on/off and selecting audio sources like CD, FM/AM, or AUX.
Guidance on controlling the volume level and making basic sound adjustments.
How to tune into radio stations using auto search and manual search methods.
Method for automatically storing the strongest stations into memory presets.
Procedure for manually selecting and storing favorite radio stations into memory.
How to store a station to the EX button for quick recall, even when the unit is off.
Instructions on how to access and play back previously stored radio stations.
How to use the SCAN function to briefly listen to stations before selecting one.
How to display assigned names for radio frequencies and toggle with frequency.
Adjusting FM reception to MONO for improved clarity in weak signal areas.
Steps for inserting a disc and starting automatic playback, including display information.
How to view disc title, performer, and track titles recorded on a CD Text disc.
Methods for fast-forwarding, rewinding, skipping tracks, and direct track selection.
Options for playing tracks repeatedly or in random order.
How to play the first 15 seconds of each track for preview.
How to prevent a CD from being ejected from the loading slot.
Instructions for inserting cassettes and starting automatic tape playback.
How to enable Dolby B NR and change the tape playback direction.
Procedures for stopping tape playback, ejecting cassettes, and fast-forwarding/rewinding.
Using MMS to automatically locate the start of a specified tune on the tape.
How to automatically skip silent sections on a tape using B.SKIP.
How to play the current tune repeatedly.
How to prevent a cassette from being ejected from the compartment.
How to adjust FADER, BAL, and VOLUME for personalized sound.
How to adjust the Super Bass (S.BASS) level for enhanced low frequencies.
How to select predefined sound modes (FLAT, POP, JAZZ, etc.) to match music genres.
How to save specific EQ settings for individual sources like FM, CD, or Tape.
Guide to adjusting and saving personalized sound profiles (LOW/MID/HIGH freq. & level).
Guides users through choosing from various visual display modes for audio levels, including demonstrations.
Instructions on setting the unit's built-in clock for accurate time display.
Overview of how to access and adjust preferred settings modes for various functions.
How to configure the clock display to be visible when the unit is turned off.
How to manage the display dimming feature, including Auto Dimmer.
How to adjust the display's brightness and contrast level from 1 to 10.
How to set the display mode for scrolling CD text information (once, auto, or off).
How to adjust the input level for external components connected via the MP3 INPUT jack.
Instructions for enabling or disabling the unit's demonstration mode.
How to assign custom names to station frequencies and external components for display.
Step-by-step guide for selecting character sets, characters, and positions to name sources.
How to connect and select external audio sources like MP3 players or MD players.
How to select and play discs from a connected CD changer.
Methods for fast-forwarding/rewinding tracks and directly selecting discs or tracks.
Selecting modes for repeated tracks, random playback, or previewing track beginnings.
Guidelines for cleaning cassette heads, maintaining tape quality, and storing tapes.
Instructions on how to handle, clean, and store CDs to ensure proper playback.
Information on playing recordable and rewritable CDs, including compatibility and handling.
Solutions for problems like CDs not playing, sound interruptions, or display errors.
Solutions for issues with radio presets, static noise, CD changer errors, and CD-R/RW playback.
Explanation of mistracking caused by rough roads and recommended actions.
Technical details on power output, frequency response, sensitivity, and impedance.
Technical specifications for the CD player and cassette deck, including SNR and wow/flutter.
Details on power requirements, operating voltage, dimensions, and weight.
Information on JVC's website for technical support and customer service.
Key information for solving common problems and procedures for resetting the unit or ejecting CDs.
Precautions and advice for installing the unit in a car, including mounting and wiring.
List of included parts for mounting and connecting the unit, with illustrations.
Critical warnings and procedures for connecting power, ground, and speaker leads correctly.
Detailed diagrams showing how to connect the unit to the car's electrical system and speakers.
Step-by-step guide for connecting the main power cord and speaker wires to the vehicle.
Common problems related to wiring and their solutions, such as fuse issues or no sound.
Detailed safety precautions for power and speaker connections to prevent damage.
How to connect amplifiers, CD changers, or external components for system upgrades.
