JVC KW-XR816

22 ENGLISH
Listening to the iPod/iPhone
You can connect the iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to the
USB input terminal on the control panel or USB cable from the rear of the unit.
There are three control terminals:
• <Headunit Mode> Control by this unit;
• <iPod Mode> Control by the connected iPod/iPhone;
• <External Mode> The sound of any functions (musics, games, applications, etc.) running on
the connected iPod/iPhone is emitted through the speakers connected to
this unit.
Preparation:
Select the controlling terminal, <Headunit Mode>, <iPod Mode>, or <External Mode> for iPod
playback:
• Press and hold
BACK button.
• Make the selection from <iPod Switch> setting, 30.
The operations explained below are under <Headunit Mode>.
~
] Turn on the power.
Ÿ
– – – – – – – – and / or – – – – – – – –
Playback starts automatically.
USB input terminal
USB cable from the
rear of the unit
iPod/iPhone
iPod/iPhone
USB 2.0 cable (accessory of the iPod/iPhone)
USB 2.0 cable (accessory of the iPod/iPhone)
EN22-33_KW-XR816_001A_3.indd 22EN22-33_KW-XR816_001A_3.indd 22 1/27/10 4:58:17 PM1/27/10 4:58:17 PM