52
Additional preparation
• When the Dolby Digital function is turned
on, the TV’s built-in speakers will be
muted and sound will be output to the
amplifier and external speakers through
the DIGITAL AUDIO OUT terminal.
Adjust the volume of the external
speakers with the amplifier.
Operating a JVC brand VCR or
DVD player
These buttons will operate a JVC brand VCR
or DVD player. Pressing a button that looks
the same as the device’s original remote
control button has the same effect as the
original remote control.
1 Set the VCR/TV/DVD Switch to the
VCR or DVD position
VCR:
When you are operating the VCR, set the
switch to the VCR position.
• You can turn the VCR on or off with
the (Standby) button.
DVD:
When you are operating the DVD player,
set the switch to the DVD position.
• You can turn the DVD player on or off
with the (Standby) button.
• You can also press the MENU or TOP
MENU button and display the DVD
disc menu screen, and then operate by
pressing the 7 buttons.
2 Press the VCR/DVD control buttons
to control your VCR or DVD player
• If your device is not made by JVC,
these buttons will not work.
• Even if your device is made by JVC,
some of these buttons may not work,
depending on the device you are using.
• You can use the buttons to
choose a TV channel the VCR will
receive, or choose the chapter the
DVD player plays back.
• Some models of DVD player use the
buttons for both operating the
fast forward/backward functions and
for choosing the chapter. In this case,
the 253 buttons do not work.
You cannot turn the TV on or off when the
VCR/TV/DVD switch is set to the VCR or
DVD position.
When you turn the TV on or off, set the
VCR/TV/DVD switch to the TV position.
To Next Page
Loading...
Need help?
General
