JVC LT-32DE9BJ - Page 31

GB-30
MENU SETTINGS
DTV Setup (In Digital TV Mode Only) : > DTV Setup
● Record:(Refertop.35)
● Configuration:(Refertop.45)
● Edit Channels:(Refertop.34)
● Installation:
-
Auto Search / Manual Search:(Refertop.33)
- Software Update:(Refertop.47)
-
Default Setting:(forDigitalTVModeOnly)
Sets the current all settings of the Digital TV mode to the default
settings.
NOTE:
Please note that once you perform the Default Setting, all data such
as digital channel list, and user configured data are deleted. But, no
informationonyourHDDwillberemoved.
After completing the default setting, the installation wizard for digital
channels will appear automatically in a few seconds.
For more information about Default Setting of the analog channels,
refer to p.28.
● System
-
Status:Youcanviewsysteminformation.
-
Signal Detection:Youcanviewthesignalstrengthandsignal
quality of the channel that is currently on air.
- Common Interface:YoucanviewthecurrentstatusoftheCAM(ConditionalAccessModule).
NOTE: The displayed information about a Common Interface may differ depending on Common Interface type
▪
▪
▪
> D T V S e t u p
DT V S e t u p
Move Enter
Record
Edit Channels
Installation
System
Congurations