To Next Page

To Previous Page

GB-22

BASIC OPERATION

Selecting the Main Input Source

Onceyouhaveconnectedyourvariousaudioandvideosystems,youcanviewdifferentsourcesbyselectinginput

sources.

1 Press the AV button.

2 Select a main input among the sources and press the OK button.

NOTE: You can easily switch to digital TV from different sources by pressing the TV/DTV button.

Setting the Aspect Ratio

You can select an aspect ratio mode by pressing the ZOOM button repeatedly on the remote control.

Auto - Regular - Panoramic - 14:9 Zoom - 16:9 Zoom - 16:9 Zoom Subtitle - Full

SUBTITLE

Regular Panoramic 14:9Zoom

SUBTITLE

16:9Zoom 16:9ZoomSubtitle Full

NOTE:

When

Autoisselected,youcanselectadefaultaspectratiofor4:3signal.(exceptwhen480p/576pmode)(Refertop.28)

WhenthecomponentorHDMIinputmodewith480por576psignal,youcanselectonlytheAuto,FullorRegular.

WhenthecomponentorHDMIinputmodewith720por1080isignal,youcanselectonlytheFull, HD Zoom or Slim.

SUBTITLE

Full HDZoom Slim

Forpictureswitha16:9aspectratiothathavebeensqueezedintoanormalpicture(4:3aspectratio),selectFull mode to

restore their original dimensions.

To move the picture vertically:

If you cannot see subtitles at the bottom of the screen, or if the top or bottom is cut off, move the picture vertically

usingthe▲/▼buttonbeforethedisplaydisappears.

NOTE: If you change the aspect ratio mode, the picture returns to its default position.

▪

JVC LT-32DE9BJ User Manual

Questions and Answers: