·Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of ammable liquid or gas.
·A battery subjected in extremely low air pressure that may result in an explosion or the leakage of
ammable liquid or gas.
·Different types of batteries or new and used batteries are not to be mixed.
Batteries are to be inserted with the correct polarity.·
Exhausted batteries are to be removed from the appliance.·
The supply terminal are not to be short-circuited.·
To prevent possible high sound pressure and hearing damage risk, do not listen ·
at highvolume levels for long periods.
Never place a television set in an unstable location.
A television set may fall, causing serious personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
Using cabinets or stands recommended by the manufacturer of the television set.·
Only using furniture that can safely support the television set.·
Ensuring the television set is not overhanging the edge of the supporting furniture.·
Not placing the television set on tall furniture (for example, cupboards or bookcases) without ·
anchoring both the furniture and the television set to a suitable support.
Not placing the television set on cloth or other materials that may be located between the ·
television set and supporting furniture.
Educating children about the dangers of climbing on furniture to reach the television set or ·
its controls.
If your existing television set is being retained and relocated, the same considerations as above
should be applied.
Do not use this apparatus near water. ·
Clean only with dry cloth. ·
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus ·
(including ampliers) that produce heat.
Protect the power cord from being walked on or pinched particularly at plugs, convenience ·
receptacles, and the point where they exit from the apparatus.
Unplug this apparatus during lightning storms or when not in use for long periods of time.·
This symbol indicates that the apparatus complies with the European radio
equipment directive.
The letters 'CE' signify that products sold in the European Economic Area (EEA) have
been assessed to meet high safety, health, and environmental protection
requirements.
Class II equipment :
To identify equipment meeting the safety requirements specied for Class II
equipment according to IEC 61140.
This symbol indicates that a safety connection to electrical earth (ground) is not
required.
155
EN
To Next Page
Loading...
Need help?
General
