29
Menu system instruction
Program
Program
Picture
Sound
PVR Option
Network
About
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Signal Information
Setting
Lock
Program
1. Press key to display the main menu on the screen.
2. Press / key to select " rogram" option.
3. Press key to enter " rogram" submenu.
Press ▲/▼ key to select "Auto Tuning" option. The
number of searched channels will be shown on the
screen.
MENU
Auto Tuning
Note: If you want to exit the whole searching,
you can press EXIT button.
DTV Manual Tuning
You can use ◄/► button or input number to
choose the channel. Then press button to
search, the TV will store the DTV channel if there
is a DTV signal present.
ENTER
ATV Manual Tuning
In the ATV/DTV source, you can choose "ATV
Manual Tuning" to enter "ATV Manual Tuning" menu.
Current CH
You can see the current channel number and you can press ◄/►button to choose the channel
you want to modify. It will be searched and saved automatically.
Select the "Color System" option, press ◄/► on the remote control to change. The color system
will be changed repeatedly in the order: PAL-N, PAL-M, NTSC or AUTO.
Color System
Fine Tune
In case of unfavorable image or sound of TV program, you can use "Fine Tune".
You can see the frequency of the searched channels.
You can see the channel you chose.
Frequency
Save
P
P
37
Press OK to search
DTV
0
Data
0
Radio
0
Signal
DTV Manual Tuning
1
Search
Fine-Tune
Save
ATV Manual Tuning
867.875 MHz
Sound System
Color System
BG
PAL
To Next Page
Loading...
Need help?
General
