JVC LT-32N3105A User Manual

31
Menu system instruction
Network
1. Press key to display the main menu on the screen.
2. Press / key to select "Network" option.
3. Press key to enter "Network" submenu.
MENU
 

Wi-Fi
When the W -F network is used, if
select , "Auto Scan" option and
Wi-Fi , then
i i wireless going to be
auto scan select press
key to select your network enter password
to connect your i- i network W F .
If select manual input, "Manual Input" option,
then setting up the IP, Netmask, Gateway and DNS in
sequence. When the setting complete, press the
"Connect" option.
select
Ethernet
When the wired network is used, if select dynamic IP address setting, select the "DHCP" in the
"Configuration", and press the "C " button to enter. If select static IP address setting, select
"Static" in the "Configuration", then setting up the IP, Netmask, Gateway and DNS in
sequence. When the setting complete, press the"C ".
onnect
onnect
Wake On LAN/Wake On WLAN
◄/►
Use the Buttons to turn on these
functions. Your mobile phone should
be in the same network as the TV.
Network
Picture
Sound
PVR Option
About
Setting
Lock
Program
Network / Ethernet
Network
Protocol
Configuration
IP
Netmask
Gateway
DNS
Connect
255.255.254.0

172.16.66.254
Ipv4
Static
172.16.67.130
172.16.64.81
Network
Picture
Sound
PVR Option
Setting
Lock
Wi-Fi
Ethernet
Wake On LAN
Wake On WLAN
On 
On

Not Connected
Not Connected
Network
Picture
Sound
Setting
Network / Wi-Fi
Auto Scan
Manual Input
Network
Picture
Sound
Setting
Network / Wi-Fi
Searching, Please Wait...


JVC LT-32N3105A Specifications

General

Brand	JVC
Model	LT-32N3105A
Category	LED TV
Language	English