38
IMPORTANT PREPARE USE SETTING TROUBLE?
ENGLISH
Problem Actions
Page
Basics
Screen
Picture
Sound
Remote control stops
working
z Unplug TV, several minutes later plug it in again. –
Aspect ratio changes
unintentionally
z Press “ ” to return to your settings. 25
Poor picture quality
z Change the “Picture Mode” setting.
z Unnatural colour >>> Adjust “Colour” and “Bright-1”.
Check your “Colour System”.
z Noise >>> Set to the following functions.
Picture Mode: Standard
Super DigiPure: Max
z Dull picture >>> Set to the following functions.
Picture Mode: Bright
Super DigiPure: Min
30
30
31
30
31
30
31
Strange picture when
using an external
device
z If you connected S-Video output device, check the “S-In” setting.
z If the top of the image is distorted, check the video signal quality
itself.
z If movement appears unnatural when receiving a signal from a
DVD player etc., with 625p (progressive-scanning), change the
output setting of the external device to 625i (interlace-scanning).
22
–
–
Poor sound
z Adjust the “MaxxAudio” setting.
z If receiving a poor signal in “Stereo/ t·u”, switch to “v”
(monaural).
z Change the broadcasting system using “Manual”.
32
32
12
PC screen alignment is
off
z Adjust the “PC Position”. 36
No sound from the
audio component
z Audio signals received from EXT-5 and EXT-6 cannot be sent to
the AUDIO OUT terminal.
–
Enters “100Hz Clear
Motion Drive”
demonstration when
watching TV.
z Set “Auto Demonstration” to “Off”. 36
LT-32P80BU_EN.book Page 38 Wednesday, May 30, 2007 1:06 PM
To Next Page
Loading...
Need help?
General
