English - 5 -
The source device should also be at least HDMI 2.0a
Picture Mode menu
Dolby Vision
Bright, Dolby Vision Dark and Dolby Vision Vivid.
lighting conditions. To change the Picture Mode setting
Menu
content and go to Picture menu. While watching Dolby
access the Picture menu and set the Picture Mode.
Antenna Connection
Left side of the TV
Rear side of the TV
LNB
before making any connection. After the connection
is done, you can turn on the units and use them.
Stand Installation &
Wall Mounting
Assembling / Removing the pedestal
Preparations
Assembling the pedestal
1.
2.
Removing the pedestal from the TV
When using the wall mount bracket
mount bracket.
Holes and measurements for the wall mount bracket
installation;
VESA WALL MOUNT MEASUREMENTS
Hole Paern
Sizes (mm)
W H
100 100
Screw Sizes
Length (X)
min. (mm) 7
max. (mm) 8
Thread (Y) M4