JVC MX-G50 Service Manual

MX-G50/MX-G56
1-24
1) Before the actual adjustment, clean the play/recording
head.
2) Measuring tape :
i) VT-703 / MTT-114N(or equivalent 10kHz AZIMUTH control)
-114N(or equivalent 10kHz AZIMUTH control)
3) The cassette deck is connections as shown in figure 1-7.
Notes
AZIMUTH
1
SPK OUT
(VTVM is
connected to
the scope)
- Turn the control
screw to as shown
in Figure 1-6.
Max output
and same phase
(both channels)
After
adjustment
secure it with
REGION
LOCK.
Remark
Standard
To Adjust
Pre-Setup
Item
Step
Pre-Setup
Condition
After putting MTT-
114N into Deck 1
- Press FWD PLAY
button.
AZIMUTH
1
2
SPK OUT
(VTVM is
connected to
the scope)
- Turn the control
screw to as shown
in Figure 1-6.
Max output
and same phase
(both channels)
After
adjustment
secure it with
REGION
LOCK.
7mV(
mV)
Turn JSR2L,JSR2R
to the right and left
Remark
Standard
To Adjust
Pre-Setup
Item
Step
Pre-Setup
Condition
Fig 1-8
After putting VT-703
into Deck 2
1)Press FWD PLAY
button.
After putting AC-225
into Deck 2
1)Press REC PLAY
button.
2)MAIN PCB JCW3,
connectted to VTVM
Recording
Bias
Voltage
To adjust plabyback level/REC
2. Adjust Deck 2 Play Level/REC BIAS
1. Adjust Deck 1 Play Level
0.5
ii) AC-225/MTT-5512(or equivalent)

JVC MX-G50 Specifications

General

CD Player	Yes
FM/AM Tuner	Yes
Bluetooth	No
USB Port	No
Tuner Bands	FM/AM
Speakers	2
Frequency Response	20Hz - 20kHz
Inputs	Auxiliary
Outputs	Headphone