JVC MX-G50 - Sleep Timer and Timer Priority

MX-G50/MX-G56
1-23
(GND)
VTVM
To adjust tape speed
1) Measuring tape: i) VT-712/MTT-111(or equivalent)
(Tapes recorded with 3kHz)
ii) AC-225/MTT-5512(or equivalent)
2) Connect the cassette deck to the frequency counter
as in figure 1-5.
Notes
NOR
SPEED
Control
1
OUT
(connected
to the frequency
counter)
Turn VSR1 to
left and right
(FRONT PCB)
3KHz
Remark
Standard
To Adjust
Pre-Setup
Item
Step
Pre-Setup
Condition
1) Deck 1:VT-712
2) Press PLAY
SW button
3) Deck 2:Same
as above
Cassette Deck
output
SPK OUT
Frequency Counter
Figure 1-5
Figure 1-6
SPK OUT
Recording /Play head
AZIMUTH control screw
Figure 1-7
In Out
Cassette Deck
Oscilloscope
2 Cassette Deck
range
Figure 1-8
Audio OSC.
SET
(MAIN PCB)
Oscilloscope
AUX IN
LINE OUT
VTVM
IN
JCW3
IN OUT
TP
1%