EasyManuals Logo

JVC QL-F6 Instruction Book

JVC QL-F6
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
9. Hold the counterweight at the adjusted position and
turn the tracking force dial until the "0" mark is aligned
with the index line on the tonearm weight shaft. (See
Fig.10)
10. Turn the counterweight in the B direction until the
"1.75" mark on the dial is aligned with the index line.
The "1.75" mark means an optimum tracking force of
1.75g is being applied. (See Fig.11)
Note:
Turning the counterweight in the direction A decreases
the tracking force and increase it in the direction B.
Turning the dial only, has no effect on the tracking force.
How to use the sub-counterweight (See Fig.12)
If you employ a heavier headshell or cartridge that makes it
impossible to obta in the zero balance with the counterweight,
mount the provided sub-counterweight onto the shaft and
slide it as close to the counterweight as possible.
Note:The sub-counterweight is suitable for cartridge/headshell
assemblies weighing 20 to 24 g. There is no need to use
it for the cartridge/headshell provided with this unit.
2. Anti-skating adjustment
Adjust the anti-skating force according to the cartridge
being used. Turn the anti-skating knob dial to the same
number on the tracki ng force dial. Use the 8 marked dial
when employing a spherical stylus. Use the. marked dial
for an elliptical or a Shibata stylus. Set the "1.75" of the
.marked dial to the index line since the OL-F6 is
provided with an elliptical stylus and the tracking force has
been adjusted to 1.75 g. (See Fig. 13)
3. Oil-damped tonearm adjustment
Turn the HO damping control and the Vo damping control
knobs until the "1.75" marks on the dial are al igned with
the index line, since the optimum tracking force for this
unit is 1.75 g. When not using the oil-damped function, turn
the knobs until the "0" mark is aligned with the index line.
(See Fig. 14)
Caution: 1) Turning the HO and Vo damping control knobs
while playing a record may cause damage to the
disc or to the stylus tip. Do not touch them
while playing a disc.
2) Align the "1 " marks of both the HO and Vo
damping control knobs with the index line
when using a cartridge requiring a tracking
force of 1 g.
Release the tonearm clamp and start playing the record.
-6~

Other manuals for JVC QL-F6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC QL-F6 and is the answer not in the manual?

JVC QL-F6 Specifications

General IconGeneral
BrandJVC
ModelQL-F6
CategoryTurntable
LanguageEnglish

Related product manuals