EasyManua.ls Logo

JVC RX-DP9VBK - Menu Operating Procedure

JVC RX-DP9VBK
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
Menu Operating Procedure
Ex.When adjusting a DSP parameter
On the TV screen
1. Press ADJUST MENU.
2. Press or % (DOWN or UP) repeatedly
to select the desired submenu.
In this example, select “DSP PARAMETER”
submenu.
3. Press SET.
4. Set a desired item on the submenu.
1 Press or % (DOWN or UP)
repeatedly to select an item.
2 Press # or @ (RIGHT or LEFT) to set
the item.
In this example, set “ROOM SIZE” to “5.
5. Set other items on the same submenu if
necessary.
1 Press or % (DOWN or UP)
repeatedly to select another item on
the same submenu if necessary.
2 Press # or @ (RIGHT or LEFT) to set
the item.
In this example, set “LIVENESS” to “5.
Operations On the main unit’s display
ADJUST” appears for 2 seconds*, then
one** of the submenu names appears.
:ENTER
:EXIT
ADJUST MENU
LEVEL
PARAMETRIC EQ
DSP PARAMETER
CENTER CHANNEL
Move to “DSP PARAMETER.
Press the button until “DSP” appears.
SPEAKERS
VOLUME
1
dB
One item** on the selected submenu
appears (with the current setting shown
on the lower line of the main display).
:OPERATE
:BACK
DSP PARAMETER
EFFECT LEVEL :3
ROOM SIZE :3
LIVENESS :3
WALL TYPE :3
SEAT POSITION:1
When adjusting the parametric equalizer:
Repeat steps 2 and 3 to select the items on the
submenu, and to go to its adjustment screen.
:OPERATE
:BACK
DSP PARAMETER
EFFECT LEVEL :3
ROOM SIZE :5
LIVENESS :3
WALL TYPE :3
SEAT POSITION:1
SPEAKERS
VOLUME
1
dB
To erase the menu (to return to the regular screen)
Press ADJUST MENU.
*
“ADJUST” appears only when using the button on the unit.
**
When using the buttons on the unit, the last item selected will
appear; on the other hand, when using the remote control, the
first-listed item on the menu will always appear.
To return to the previous screens
Press EXIT.
Each time you press the button, the on-screen display menu returns
to the one previously displayed. (On the unit’s main display, the
indications also change accordingly.)
:OPERATE
:BACK
DSP PARAMETER
EFFECT LEVEL :3
ROOM SIZE :5
LIVENESS :5
WALL TYPE :3
SEAT POSITION:1
SPEAKERS
VOLUME
1
dB
The selected submenu appears.
SPEAKERS
VOLUME
1
dB
SPEAKERS
VOLUME
1
dB
SPEAKERS
VOLUME
1
dB
:ENTER
:EXIT
ADJUST MENU
LEVEL
PARAMETRIC EQ
DSP PARAMETER
CENTER CHANNEL
Adjustment Menu appears.
EN34-38_RX-DP9VBK[J]_f 01.6.14, 9:54 AM36

Table of Contents

Related product manuals