JVC RX-E100SL - Page 35

33
Mastering Remote Operations
❏ Operating other JVC products — Audio/video
operation buttons
■ After pressing DVD (source selecting button), you can use
the following buttons for DVD operations.
3 : Start playback.
7 : Stop playback.
8 : Pause playback. To release it, press 3.
¢ :Skip to the beginning of the next track.
4 :Return to the beginning of the current
(or previous) track.
■ After pressing TV (source selecting button), you can use the
following buttons for changing the channels on the TV.
TV/VCR CH +/– : Change channel numbers.
■ After pressing VCR (source selecting button), you can use
the following buttons for VCR operations.
TV/VCR CH +/– : Change channel numbers on the VCR.
3 : Start playback.
7 : Stop playback.
8 : Pause playback. To release it, press 3.
¡ : Fast-wind a tape.
1 : Rewind a tape.
■ After pressing CD (source selecting button), you can use
the following buttons for CD operations.
3 : Start playback.
7 : Stop playback.
8 : Pause playback. To release it, press 3.
¢ :Skip to the beginning of the next track.
4 :Return to the beginning of the current
(or previous) track.
■ These buttons works only for TVs.
TV/VIDEO : Change the input mode (Video
input and TV tuner) on the TV.
TV VOL +/– : Adjust the volume on the TV.
5
– SUBWOOFER +TEST
6
5
EFFECT
– CENTER +
5
98
– REAR•L +
BASS
BOOST
5
– REAR•R +
MENU
5
7
32
ENTER
+10
010
1
4
1
1
TV/VCR
CH
8
+
+
–
£
7
TV/VIDEO
TV VOL
–
+
❏ Adjusting the sound and operating other JVC
products — 10 keys
■ After pressing SOUND, you can use the 10 keys for sound
adjustments. (See also pages 18, 19, 25 – 28)
TEST :Turn on or off the test tone output.
EFFECT :Change the DSP effect level.
BASS BOOST :Turn on or off Bass Boost.
SUBWOOFER +/– :Adjust the subwoofer level.
CENTER +/– :Adjust the center speaker output
level.
REAR L +/– :Adjust the left rear speaker output
level.
REAR R +/– :Adjust the right rear speaker output
level.
■ After pressing DVD (source selecting button), you can use
the 10 keys (2, 4, 6, 8, 9, +10) for DVD menu operations.
MENU : Display the menu screen.
ENTER : Enter a selected item.
5 / ∞ / 2 / 3 : Select an item on the menu screen.
■ After pressing TV (source selecting button), you can use the
10 keys for selecting a channel on the TV.
1 – 9, 0 : Select a channel.
10 : Functions as the RETURN button.
+10 : Functions as the +100 button.
■ After pressing VCR (source selecting button), you can use
the 10 keys for VCR operations.
1 – 9, 0 :Select a channel on the VCR.
■ After pressing CD, you can use the 10 keys for CD
operations.
1 – 10, +10 :Select a track.
■ After pressing FM or AM, you can use the 10 keys for
tuner operations.
1 – 10, +10 :Select a preset channel.
Example: Selecting CD track numbers or preset FM/AM
channel numbers using the 10 keys
• For number 5, press 5.
• For number 15, press +10, then 5.
• For number 30, press +10, +10, then 10.
EN32-37.RX-E100SL[J]_f 01.3.7, 2:55 PM33