To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-730R and is the answer not in the manual?
Instructions for recording model and serial numbers for future reference.
Safety instructions for UK mains plug and fuse replacement.
Declaration of conformity for Italy.
Warnings about electrical shock, fire, and physical damage.
Explains how to turn the unit on/off using front panel and remote controls.
Specifies clearance needed around the unit for proper airflow and cooling.
General guidelines, location, and handling instructions before installing the receiver.
Lists included accessories and advises to check for missing items.
Identifies and explains controls on the front panel of the receiver.
Details the buttons and indicators on the outside panel of the remote control.
Details the buttons and indicators on the inside panel of the remote control.
Instructions for connecting FM antennas, including temporary and standard types.
Instructions for connecting AM/MW/LW antennas, including loop and wire types.
Step-by-step guide for connecting front speakers to terminals.
Instructions for connecting rear and center speakers to their respective terminals.
Guide for connecting a powered subwoofer to the receiver's output.
Details speaker impedance requirements based on connection configurations.
Explains how to connect audio sources like turntables, CD players, and cassette decks.
Information on controlling JVC components via COMPU LINK.
Illustrates connections for VCR, Video disc player, and TV to the receiver's rear panel.
Details using the front panel VIDEO 2 input jacks for easy connection.
Explains how to connect the power cord and the difference between standby and complete power off.
Step-by-step guide for inserting batteries into the remote control.
How to turn the unit on/off using the front panel and remote.
Guide to choosing an audio or video source for playback.
Instructions for adjusting volume using the front panel and remote.
How to select which pair of front speakers to use.
How to connect and use headphones, including speaker selection.
How to mute and unmute the audio output.
How to record audio sources to a cassette deck or VCR.
How to balance the sound output between left and right front speakers.
How to activate the loudness function for better bass at low volumes.
How to set the receiver to turn off automatically after a set time.
How to configure the size of the center speaker for optimal surround sound.
How to enable an on-screen display for receiver operations on the TV.
How to store preferred sound settings for each source.
How the receiver automatically recalls stored settings when a source is changed.
How to manually tune into FM and AM radio stations.
How to store and recall preset radio stations.
How to select between AUTO and MONO reception for FM broadcasts.
How to assign custom names to preset radio stations.
Explains what RDS signals are and the characters used in their display.
How to cycle through PS, PTY, and RT information on the display.
How to search for radio programs based on their type (PTY code).
A list of program types (PTY codes) and their descriptions.
How to temporarily switch to other broadcasts like news or traffic.
How to play sources processed with Dolby Surround.
How to choose from preset sound effect modes like ROCK, MOVIE, JAZZ.
How to adjust and store custom sound effect settings (USERMODE).
How to activate JVC's Hall Surround effect for a concert hall feel.
How to adjust the volume of the rear speakers.
How to adjust the delay time for rear speakers.
Illustrates speaker placement for Dolby Surround modes.
How to select between Pro Logic, 3CH LOGIC, and HALL surround modes.
How to set the center speaker mode (WIDE, NORMAL, PHANTOM, OFF).
Adjusting rear speaker output level and delay time.
How to use the test tone to check speaker balance.
Using the menu to set tuner functions like band, tuning, FM mode, and RDS info.
How to select desired SEA (Sound Effect Amplifier) modes.
How to adjust frequency levels for custom SEA settings.
How to select surround modes like Pro Logic, 3CH Logic, and Hall.
How to use the TV screen menu for receiver control.
How to select the audio/video source using the on-screen menu.
How to adjust speaker balance using the SETTING menu.
How to enable/disable the loudness function via the SETTING menu.
How to set the sleep timer using the SETTING menu.
How to select center speaker size via the SETTING menu.
How to enable/disable visual confirmation of operations on the TV screen.
How to connect components for COMPU LINK operation.
Overview of functions controllable via COMPU LINK.
How to operate the tuner using the remote control.
How to control surround and SEA modes using the remote.
How to control CD playback using the remote.
How to control a CD player-changer using the remote.
How to control cassette deck playback and recording using the remote.
How to control turntable playback using the remote.
How to control VCR playback, fast-forward, rewind, and recording.
How to control TV channel selection and volume using the remote.
How to create programmable sequences of remote control commands.
How to delete stored sequences of remote control operations.
How to teach the remote control to operate other brands' devices.
How to use the remote control after learning other manufacturers' signals.
How to remove learned signals from the remote control.
A guide to diagnosing and fixing common operational issues with the receiver.
Detailed technical specifications for the amplifier section.
Technical performance data for the FM tuner.
Technical performance data for the AM/MW/LW tuner.
General technical details like power requirements and dimensions.
General
