JVC RX-730R User Manual

Page 40
English
Selecting the Surround Modes (Also see pages 29, 32 and 36)
1. Press MENU.
The MAIN MENU appears on the TV.
2. Press
%%
%%
% /
fifi
fifi
fi to move to “SURROUND,” then press
@@
@@
@ /
##
##
#.
The SURROUND MODE menu appears.
3. Press
%%
%%
% /
fifi
fifi
fi to move to one of the surround modes.
If you want to adjust the selected mode, go to the following steps.
4. Press MENU.
The MAIN MENU appears on the TV again.
5. Press
%%
%%
% /
fifi
fifi
fi to move to “SURROUND ADJUST,” then press
@@
@@
@ /
##
##
#.
The adjustment menu for the mode you have selected in step 3 appears.
6. Press
%%
%%
% /
fifi
fifi
fi to move to the item you want to set or adjust, then press
@@
@@
@ /
##
##
#.
On these adjustment menus, you can do the following:
For Dolby Pro Logic:
“CENTER MODE”: Select the center mode.
“TEST”: Output a test tone.
“CENTER”: Adjust the center speaker output level.
“REAR”: Adjust the rear speaker output level.
“DELAY”: Adjust the delay time of the rear speaker sound.
“CENTER TONE”: Select the center tone.
For Dolby 3ch Logic:
“CENTER MODE”: Select the center mode.
“TEST”: Output a test tone.
“CENTER”: Adjust the center speaker output level.
“CENTER TONE”: Select the center tone.
For JVC HALL Surround:
“REAR”: Adjust the rear speaker output level.
“DELAY”: Adjust the delay time of the rear speaker sound.
7. When you finish, press MENU EXIT.
The menu disappears from the TV.
SURROUND MODE menu
PRO LOGIC adjustment menu
3CH LOGIC adjustment menu
HALL Surround adjustment
menu
RX-730RBK(EF)0054-001A.En.37-41 97.7.25, 6:59 PM40

JVC RX-730R Specifications

General

Brand	JVC
Model	RX-730R
Category	Receiver
Language	English