JVC RX-730R User Manual

Page 12
English
VOLUME 100 1k 10k
Current source
name appears
Volume level is also
shown here
whenever the power
is on.
Front panel
Remote: Outside
AUDIO
STANDBY
STANDBY/ON
STANDBY
STANDBY/ON
Basic Operations
The following operations are commonly used when you play any sound source.
Turning the Power On and Off
On the front panel:
To turn on the power, press STANDBY/ON .
The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the
display.
To turn off the power (into standby mode), press STANDBY/ON again.
The STANDBY lamp lights up.
From the remote control:
To turn on the power, press AUDIO .
The STANDBY lamp goes off. The name of the current source appears on the display.
To turn off the power (into standby mode), press AUDIO again.
The STANDBY lamp lights up.
Note:
Pressing STANDBY/ON or AUDIO again turns off the power (into standby mode) and lights the
STANDBY lamp. A small amount of power is consumed in standby mode. To turn the power off completely,
press POWER to set it in the — OFF position on the front panel.
Selecting the Source to Play
You need to select the source before you start playing any source.
On the front panel:
1. Press SOURCE so that the Control
%%
%%
% /
fifi
fifi
fi buttons work for selecting the source.
2. Press Control
%%
%%
% /
fifi
fifi
fi until the source name you want appears on the display.
The selected source lamp also lights up.
MENU
See also
page 37.
SOURCE
Front panel
Selected source
name appears
MUTE AUTO TUNED STEREO
SURROUND PRO LOGIC LOGIC3CH HALL
SEA
LOUDNESS
VOLUME VISUAL CONFIRMATION
CH–
MHz
kHz
FM
AM
TA NEWS INFO
SLEEP
EON
100 1k 10k
RX-730RBK(EF)0054-001A.En.01-28 97.7.25, 6:26 PM12

JVC RX-730R Specifications

General

Brand	JVC
Model	RX-730R
Category	Receiver
Language	English