To Next Page

To Previous Page

AV COMPU LINK remote control system

The AV COMPU LINK remote control system allows you to operate JVC TVs through the center

unit. To use this remote control system, follow the diagrams and procedure explained here.

• The AV COMPU LINK setting is performed in the OTHERS menu of the choice menus. See

page 62 for operations.

• Refer also to the manual supplied with your TV.

Connection and setup

Connecting a TV

1 Connect the center unit to a TV via the AV COMPU LINK jacks using the supplied AV COMPU

LINK cord.

2 Set the AV COMPU LINK setting in the OTHERS menu as follows.

See page 62 to set the AV COMPU LINK setting.

• When connecting to the VIDEO-3 (DVD) input jack of the TV:

Select “DVD1” (Initial setting).

• When connecting to the VIDEO-1 input jack of the TV:

Select “DVD2.”

• When connecting to the VIDEO-2 input jack of the TV:

Select “DVD3.”

Connecting a TV and VCR

• Refer also to the manual supplied with your VCR.

1 Connect the center unit to a TV and VCR via the AV COMPU LINK jacks using the AV COMPU

LINK cords.

• You need two AV COMPU LINK cords to make these connections. (Only one cord is supplied with this system.)

SOURCE

VOL

AV COMPULINK

COMPU

LINK

SOURCE

VOL

AV COMPULINK

COMPU

LINK

Center unit

AV COMPU LINK cord (supplied)

AV COMPU LINK cord

Center unit

VCR

EN67-77TH-V70[A]1 02.4.9, 10:18 AM67

JVC SP-PWV70 User Manual

Questions and Answers: