12
To locate a particular portion
While playing an iPod...
To turn on/off the charge mode
While “iPod” is selected as the source...
1 Display the current charge mode.
2 Select the charge mode you want.
Playing Back External Equipment
By using QP Link (Quick Portable Link), you can easily start
playing back the external equipment connected to the AUX
jack.
• Make sure you set the volume of your external equipment
loud enough for the System to detect the sound signal.
• If an external device is not equipped with a stereo mini plug
audio output, use a plug adapter to convert the stereo mini
plug to the corresponding plug of the audio output.
To select “AUX” as the source
To activate QP Link
When QP Link is activated, playing back the external
equipment connected to the AUX jack performs the
following:
• While listening to another source...
Change the source to “AUX” automatically. (If you change
from “AUX” to another source, QP Link will be canceled.)
• While the System is on standby...
Turn on the System and change the source to “AUX”
automatically.
• Release the button when you reach
the desired position.
ON The battery in the iPod is charged through the iPod
terminal when “iPod” is selected as the source.
OFF The battery is not charged.
Main Unit
ONLY
2 sec.
ON
OFF
(Initial setting)
INFO
Stereo mini plug
(not supplied)
On the front
panel
FMDAB
AM
AUX
Remote
ONLY
QP LINK ON
QP LINK OFF
(Initial setting)
(Canceled)
UX-DM9[B].book Page 12 Friday, July 20, 2007 2:18 PM
To Next Page
Loading...
Need help?
General
