JVC SR-HD2500US - Setting and Displaying Date;Time

Setting and Displaying
Date/Time
Set the date/time of the built-in clock as follows. The
recording date/time is stored on the disc.
Setting the date/time
Set the date/time of the built-in clock as follows.
1
Press the [SET UP] button on the remote control unit
v
The Settings menu screen appears.
.
1-
4'6740
5'672
5'.'%6
':+6
&'(#7.65'66+0)
$7<<'4176276
1((
1((37+%-56#4672
2#0'.&+52.#;$4+)*60'55
%.1%-5'6&+52.#;
4'/16'%10641. 4'/16'%10641.%1&'
#761219'41((
5'672
2
Select “SETUP”, and press the [OK] button
3
Select “CLOCK SET/DISPLAY”, and press the
[OK] button
v
“CLOCK SET/DISPLAY” menu screen appears.
.
1-
4'6740
5'672
5'.'%6
':+6
&'(#7.65'66+0)
$7<<'4176276
37+%-56#4672
2#0'.&+52.#;$4+)*60'55
%.1%-5'6&+52.#;
4'/16'%10641. 4'/16'%10641.%1&'
1((
1((#761219'41((
5'672
4
Select “CLOCK SET”, and press the [OK] button
v
The Clock Set menu screen appears.
.
1-
4'6740
5'672
5'.'%6
':+6
*6+/'&+52.#;%*1+%'
/106*&#;;'#4&#6'&+52.#;
%.1%-5'6
%.1%-5'6&+52.#;
5'672
5
Set the time and date
v
Repeat the steps below to specify the time and date.
① Press the [ J ] or [ K ] button, select the Clock Set
item, and press the [OK] button.
.
1-
4'6740
5'672
5'.'%6
':+6
%.1%-5'6&+52.#;
%.1%-5'6
5'672



'06'4
#/6+/'
,#0/106*&#;
;'#4
%.1%-5'6
② Press the [ J ] or [ K ] button, change the setting
value, and press the [OK] button.
.
1-
4'6740
5'672
5'.'%6
':+6
%.1%-5'6&+52.#;
%.1%-5'6
5'672

 

'06'4
#/6+/'
,#0/106*&#;
;'#4
%.1%-5'6
Preparation
20
2012/3/8 13:53:0