JVC SR-HD2500US - DISPLAY; CONNECTION

DISPLAY
.
1-
4'6740
5'672
5'.'%6
':+6
'0).+5*15&.#0)7#)'
5%4''05#8'4 10
10$.7'$#%-
#761105%4''0)7+&'
&+52.#;
m
ON SCREEN GUIDE
For displaying operation details.
Setting Values
Description
AUTO Appears for five seconds when an
operation is performed.
OFF Not displayed.
m
BLUE BACK
For setting the screen display when there is no signal input.
Setting Values
Description
OFF Displays screen as it is.
ON Switches display to a blue screen.
m
SCREEN SAVER
For setting whether to use a screensaver.
Setting
Values
Description
OFF Screen saver is not used.
ON Screen saver is used. Switches to the burn-
in prevention screen when the unit is not
operated for more than five minutes.
m
OSD LANGUAGE
For setting the language for messages displayed on-screen.
CONNECTION
.
1-
4'6740
5'672
5'.'%6
':+6
8+&'18+&'1+02765'66+0)
%1/210'06176276
1((
*&/+%100'%6+10
/10+6146;2'
%100'%6+10
K
*&/+%'%
m
MONITOR TYPE
For setting the aspect ratio according to the connected
monitor.
Setting Values
Description
16:9 Set to this value when connected to
monitors with 16:9 aspect ratio.
16:9FULL Choose this setting when a 16:9 monitor
is connected to display images without
the black borders.
4:3 PAN&SCAN Set to this value when connecting to
monitors with an aspect ratio of 4:3.
Plays back videos with the left and right
edges trimmed off.
4:3
LETTERBOX
Set to this value when connecting to
monitors with an aspect ratio of 4:3.
Plays back videos with a black band at
the upper and lower ends.
m
HDMI CONNECTION
v
VIDEO PRIORITY MODE
Setting Values
Description
SDI/
COMPONENT
Set to this value for output at a
resolution of “480p” or higher from the
[COMPONENT VIDEO OUT] terminal,
or from the [SDI OUT] terminal.
HDMI Set to this value when priority is to be
given to the “HDMI OUTPUT
RESOLUTION” setting.
Memo:
v
During data output from the [HDMI] terminal, setting to
“SDI/COMPONENT” automatically outputs data in the
“COMPONENT OUTPUT” setting.
Setting to “HDMI” outputs data in the “HDMI OUTPUT
RESOLUTION” setting.
v
During data output from the [HDMI] and [COMPONENT
VIDEO OUT] terminals, setting to “SDI/COMPONENT”
automatically outputs data in the “COMPONENT OUTPUT”
setting.
Setting to “HDMI” outputs data at the “480i” resolution from
the [COMPONENT VIDEO OUT] terminal.
v
When the [SDI OUT] terminal and the [HDMI] terminal are
connected at the same time, setting to “SDI/COMPONENT”
outputs data from the [SDI OUT] terminal.
Settings Menu
83
2012/3/8 13:53:0