JVC SR-VD400U - Setting Clock Manually - Manual Clock Set

12 EN
Setting clock manually
— Manual Clock Set
First follow steps 1 to 2 on page 10, then go to the
following steps.
3
Access Manual Clock Set screen
Press %fi to move the arrow to “MANUAL
CLOCK SET”, then press OK.
4
Set time
Press @ # until the
desired time appears,
then press fi.
● Holding @ #
changes the time in
30-minute intervals.
5
Set date
Press @ # until the desired date appears, then
press fi.
● Holding @ # changes the date in 15-day
intervals.
6
Set year
Press @ # until the desired year appears.
7
Select D.S.T. mode
Press %fi to move the highlight bar to “D.S.T.”,
then press
@ # to select “ON” or “OFF”.
ON– Adjustment will be made by the built-in
clock itself.
OFF– Select when Daylight Saving Time does
not apply to you.
8
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press %fi to select the item you want to change, then
press
@ # .
VCR
TV
CABLE
/DBS
8
3 – 7
INITIAL SETTINGS (cont.)
FUNCTION SET UP INITIAL SET UPTUNER SET UP
THEN PRESS [OK]
TIME – –:– –
1/1 (WED)
2003
D.S.T OFF
YEAR
DATE
RETURN
MANUAL CLOCK SET
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
VD400U-EN10-14 03.7.18, 1:02 PM12