EN 87
On-screen display
1 Cassette indication
2 Cassette type indication : pg. 26
3 Index no. indication : pg. 24
4 VCR operation mode indication
5 Audio monitor indications : pg. 23
6 Clock time
Time counter*
Tape remaining time (When “REMAIN”
appears)**
*To reset the time counter, press C. RESET on the Remote.
The counter reading becomes “0:00:00”. It is also reset
when a tape is inserted.
** The tape remaining time is calculated based on the
recording speed being used. The indicated remaining
time is only an estimate.
7 Recording mode indication : pg. 26, 27
Recording speed indication
8 Image format (HD/SD)
9 Channel and auxiliary input (“L-1”, “L-2”, “F-1”
and “I-1” etc.)
0 Audio Indications
STEREO When receiving the stereo broadcast
SAP When receiving SAP (Second Audio
Program) broadcast
SAP STEREO When receiving stereo and SAP
broadcast
Dolby D When playing back and receiving a
Dolby Digital signals
D-VHS
D-VHS
JVC DH40000
OFF
CC1
CC2
CC3
CC4
B E
D-VHS STD
12:59 AM
INDEX -9
CH 123HD
LR
SAP
STREAM When playing back and receiving a
audio
signals in other new formats
PCM When playing back and receiving a
PCM audio signals
AUDIO 1
AUDIO 2
1+2 MIX
Depends on the“DV AUDIO REC”
setting ( pg.57)
! Icons : pg. 25
: appears when a D-VHS cassette contains
the multiple programs
: appears when a D-VHS cassette contains
the multiple angle
: appears when a D-VHS cassette contains
the audio in multiple language
: appears when a D-VHS cassette contains
the subtitle in multiple language
NOTE:
The subtitles does not appear while the on-screen display is
displayed.
@ Selections of the selected icon (!)
# Model name of the device connected to the
i.LINK connector
$ Brand name of the device connected to the
i.LINK connector
% Type of device connected to the i.LINK
connector
^ Tape position indicator : pg. 22
VD400U-EN74-91 03.7.18, 1:12 PM87
To Next Page
Loading...
