EasyManua.ls Logo

JVC TH-G31C - User Manual

JVC TH-G31C
29 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TH-G31
Consists of XV-THG31 and SP-THG51F,
SP-THG61C and SP-THG50W
DVD DIGITAL THEATER SYSTEM
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and
Serial No. which are located on
the rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT2051-001A
[J]
HT994SJ-A0_BUSAJJK
TUNING TUNING

Table of Contents

Questions and Answers

  • L
    lee43Sep 12, 2025
    What to do if there is no sound from my JVC Home Theater System?
    • J
      jonathanpettySep 12, 2025
      If you're experiencing no sound or very low sound from your JVC Home Theater System, consider the following: * Verify that the equipment connected with the audio cable is set to receive DVD audio signal output. * Make sure the audio cables are securely connected. * Ensure that the equipment connected with the audio cable is turned on. * If the audio connecting cable is damaged, replace it.
  • T
    Tanya OnealAug 25, 2025
    Why is there no picture on my JVC TH-G31C?
    • D
      dianechaseAug 25, 2025
      There could be several reasons why you're not seeing a picture. First, ensure your TV is set to the correct video input mode to receive the DVD signal. Second, check that the video cable is securely connected to the jacks. Finally, make sure your TV is powered on.
  • D
    Danielle HamiltonAug 25, 2025
    What to do if JVC Home Theater System remote control does not work?
    • S
      Seth ZimmermanAug 26, 2025
      If your remote isn't working, first, make sure you're pointing it directly at the remote sensor on the DVD/CD Receiver within a range of about 23 ft (7 m). Check for any obstacles blocking the path between the remote and the receiver. Also, try replacing the batteries in the remote with new ones.
  • S
    Stephanie HarrisSep 23, 2025
    Why is there a loud hum or noise heard on my JVC TH-G31C?
    • J
      Jessica JimenezSep 23, 2025
      If you're hearing a loud hum or noise from your JVC Home Theater System, it could be due to a dirty disc, poorly connected speakers and components, or the DVD/CD Receiver being too close to the TV. Try cleaning the disc, securely connecting the speakers and components, and moving the TV away from the audio components.
  • C
    crystalswansonSep 12, 2025
    Why is my JVC TH-G31C Home Theater System remote control not working?
    • V
      Victoria DavisSep 12, 2025
      If the remote control for your JVC Home Theater System isn't working correctly: * Make sure you're pointing the remote at the remote sensor on the DVD/CD Receiver. * Ensure you're within 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles between the remote and the DVD/CD Receiver. * Try replacing the batteries in the remote with new ones.
  • N
    Noah HuffmanSep 18, 2025
    What to do if there is no sound from JVC TH-G31C or only a very low-level sound is heard?
    • A
      Andrew CarrSep 18, 2025
      If you're experiencing no sound or very low sound from your JVC Home Theater System, ensure the equipment connected with the audio cable is set to receive the DVD signal output by selecting the correct input mode on the receiver. Check that the audio cables are securely connected. Also, verify that the connected equipment is powered on. If the problem persists, the audio connecting cable may be damaged and should be replaced.
  • B
    brooke26Sep 5, 2025
    What to do if the JVC Home Theater System DVD/CD Receiver audio CD indicator does not work?
    • B
      Brittany PerkinsSep 6, 2025
      If the DVD/CD Receiver audio CD indicator on your JVC Home Theater System isn't working, make sure a disc is inserted.
  • M
    Mary GreenSep 6, 2025
    How to fix JVC TH-G31C Home Theater System remote control that is not working?
    • V
      Vanessa WatsonSep 6, 2025
      If your JVC Home Theater System remote control isn't working, first, make sure you're pointing it directly at the remote sensor on the DVD/CD Receiver. Ensure you are within 23 ft (7 m) of the receiver and that there are no obstructions in the path. If it still doesn't work, try replacing the batteries with new ones.
  • T
    tammyjacksonSep 18, 2025
    How to fix a JVC TH-G31C Home Theater System when radio stations cannot be tuned in?
    • J
      Juan DodsonSep 18, 2025
      If your JVC Home Theater System is not tuning into radio stations, check that the antenna is securely connected and properly positioned. If you're using automatic tuning, the signal strength of the stations may be too weak, try tuning in the station manually. If tuning by scanning preset stations, ensure that the stations have been preset.
  • J
    John ScottAug 30, 2025
    Why DVD/CD Receiver audio CD indicator does not work on JVC Home Theater System?
    • C
      Christina TurnerAug 30, 2025
      If the DVD/CD Receiver audio CD indicator isn't working, it might be because no disc is inserted. Try inserting a disc.

JVC TH-G31C Specifications

General IconGeneral
TypeHome Theater System
Speaker Configuration5.1
Total Power Output1000W
SubwooferYes
HDMI Inputs1
USB PlaybackYes
BluetoothYes
Total Power Output (Peak)1000W
DVD PlayerYes
HDMI Input1
HDMI Output1
Optical Input1
Subwoofer (Wireless)No
Remote ControlYes

Related product manuals