JVC UX-A3 User Manual

UX-A3 B/E/G/GI/EN
RECORDING
e Inrecording, the ALC circuit automatically optimizes the
recording level; adjustment of the recording level is
unnecessary.
® Check that the safety tab on the cassette tape is not
broken off.
Notes:
This unit has recording characteristics suitable for normal
and CrO, tapes. Normal and CrO» tapes have different
characteristics from metal tape.
CD edit recording (for CDs with up to 99 tunes)
e By checking the total playing time of the CD, a
microcomputer in the unit automatically calculates the
optimum length (recording time) of the tape to be used,
displays the required tape length, and divides the tunes
on the disc into two groups to be recorded on the two
sides of the tape so as to minimize tape waste.
Operate in the order shown
tse
aSS
=i (J
a) ae
Cotto
e722 BF
* ee
1
@ Press to open the CD door
@ Load a disc and press to close the CD door.
@ Set to the CD mode.
@ l\f the PLAY button of the deck is pressed, press the
STOP/EJECT (mi/4) button to set to the stop mode.
@ Press the EDIT button once.
EOIT reo; 02 The tune
O >| 7 mu Boe sae numbers
L747 recorded
on side A
appear.
@ Press the SIDE A/B button.
SIDE AB - EDITS The tune
= ea SIDE BI a numbers
=. i tas L, Lf fom recorded
ai on side B
appear.
16 (No. 1850)
69098
OOLEYNR
Ox GED Py
Insert a cassette with a suitable length (recording time)
with side A facing out.
@ The tape length can be set from the remote control.
(See below.)
Set to the forward direction. (The » indicator lights.)
Setto G mode.
Check that the pause button of the deck has been
released, then press the (@) REC button and the PLAY
button to start CD edit recording.
e During edit recording, the leader tape section
(approx first 12 sec.) is wound automatically and
then recording starts.
Engage the recording mode until the end of tape of side
B is reached after the CD has finished.
To change the tape length (recording time)
When the EDIT button is pressed with a CD loaded, the
tape length required to record the entire disc is
displayed (C-46, C-54, C-60, C-74 or C-90).
At this time, the displayed tape length can be changed
by pressing the track number buttons.

JVC UX-A3 Specifications

General

Brand	JVC
Model	UX-A3
Category	Stereo System
Language	English