JVC UX-G48 - Repeat and Time Search Functions; Advanced Repeat Modes; Time-Based Content Search

25
4 Select the repeat mode you want.
* While playing a DVD-VR, “PG” appears, and while
playing a Play List, “PL” appears.
** During Program Play and Random Play, “STEP”
appears.
5 Finish the setting.
A-B Repeat
• See also page 22.
1 While playing, display the entire on-screen bar.
2 Select .
3 Display the pop-up window.
4 Select “A-B.”
5 Select the start point (A).
6 Select the end point (B).
To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF”
in step 4.
Time Search
You can move to a particular point by specifying the elapsed
playing time from the beginning.
• This function is not available during Program Play and
Random Play.
1 While playing (without PBC for SVCD/VCD), display
the entire on-screen bar.
• Time Search can also be used before starting playback
(not applicable for DVD Video/DVD-VR).
2 Select .
3 Display the pop-up window.
4 Enter the time.
You can specify the time in hours/minutes/seconds.
• It is always required to enter the hour digit (even “0”
hours), but it is not required to enter the final zeros (the
last two digits in the examples above).
• To correct a mis-entry,
press < to erase the last entry.
5 Confirm your entry.
A-B Repeats a desired portion (see below).
TITLE* Repeats the current title.
ALL Repeats the disc (not applicable for
DVD) or programmed track.
CHAPTER ** Repeats the current chapter.
TRACK** Repeats the current track.
OFF Cancels Repeat Play.
A-B Repeat starts. The selected
portion plays repeatedly.
• Before pressing ENTER/SET, you
can search for the end point using
the
¡ button.
ENTER/SET
OFF
OFF
1/3
1/3 1/3
TIME
TITLE 14
TOTAL 1:25:58
CHAP 23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/31/1
TOTAL 1:01:58
CHAP 3
OFF
Dolby D
3/2.1ch
OFF
TIME
T
DVD-VIDEO
TIME OFF CHAP.
A–B
Dolby D
3/2.1ch
TV CH
TV CH
ENTER/SET
1/3
TIME
TITLE 14
C
H
DVD-VIDEO
TITLE 2
TIME A- CHAP. 1/3
C
Dolby D
3/2.1ch
ENTER/SET
Examples:
To move to a point of 1
(hours): 02 (minutes): 00
(seconds), press 1, 0, 2, 0, then
0.
To move to a point of 54
(minutes): 00 (seconds), press
0, 5, 4, 0, then 0.
The System starts playing the disc
from the selected playing time.
OFF
1/3
1/3 1/3
TIME
TITLE 14
TOTAL 1:25:58
CHAP 23
DVD-VIDEO
TITLE 2
TIME OFF CHAP. 1/31/31/1
TIME 0:00:58
CHAP 3
TIME _ : _ _ : _ _
Dolby D
3/2.1ch
0
DIMMER A.STANDBY SLEEP
3D P/HP S
CLOCK/TIMER
ZOOM SCAN MODE
1
4
7
2
5
8
3
6
9
ANGLE
C.VOICE
CANCEL
ENTER/SET
UX-G48[U].book Page 25 Friday, July 13, 2007 5:01 PM