28
To move the character entry position
To erase a character
When the character entry position is on the character you
want to erase...
To enter a space
Select the space from “Symbols.” (See “Available
Characters” on page 27.)
• You can also enter a space at the end of a title by pressing
3.
To quit title entry
• The entered titles are not stored.
Erasing the Tracks or Groups
Remote
ONLY
You can erase tracks/groups on the USB device.
• Once the tracks are erased, you cannot resume them.
• To go back to the previous step, press CANCEL (while
holding SHIFT).
• To quit erasing, press 7.
1 Start and stop playback of the USB device.
Move the entry position to the right.
Move the entry position to the left.
(while holding...)
2 Select a track/group you want to erase.
To select a track:
To select a group:
3 Select the track/group title erase mode.
4 Confirm the selection.
5 Erase your selection.
(while holding...)
(Canceled)
(while holding...)
EN25-36_UX-G500V[U]1.indd 28EN25-36_UX-G500V[U]1.indd 28 3/11/08 12:58:16 PM3/11/08 12:58:16 PM
To Next Page
Loading...
Need help?
General
