17
English
Recording Discs
—Disc Synchronized Recording
You can start disc play and recording at the same time.
On the unit ONLY:
1
Put a recordable cassette in with the exposed
part of the tape down.
• See also page 15.
2
Close the cassette holder gently.
3
Press CD select the CD player as the
source.
4
Press ‡ (recording).
The CD SYNC indicator appears on the
display and the CD starts playback
automatically and the recording starts.
• When the end of the tape is reached, recording stops and
the CD player is paused.
• If you press ‡ while playing back the CD, the CD player
return to the beginning of that track and the track is
recorded on the tape.
You cannot press ‡ in the following cases:
• If no cassette is inserted.
• If a protected tape is inserted.
To stop recording for a moment, press *.
The recording is paused, but the CD playback
does not stop.
To resume recording, press * again.
To stop recording, press &/).
The recording stops and the CD playback is
paused.
To remove the cassette, press &/) while
recording is stopped.
CD
UX-H10[UW]rec.p65 03.6.27, 1:38 PM17
To Next Page
Loading...
Need help?
General
