Introduction
43
Listening to Cassette Tapes
1 Insert a cassette tape.
CAUTION
• Before using a cassette tape, wind up any slack in
the cassette tape. ( "Handling casette tapes"
on page 75)
• Do not use long cassette tapes such as C-120 or
C-150. Long cassette tapes are thin and stretch
easily, and may become tangled in the inner part
of the main unit.
• This product is compatible with playback of
TYPE I cassette tapes. Playback of TYPE II or
TYPE IV cassette tapes is not recommended,
because this product does not meet the specifi-
cations for these tapes. The main unit does not
produce the proper sound from these cassette
tape types.
2 Press repeatedly to select
the reverse mode.
Operation
Stop
Press .
Fast forward/
Rewind
Press or .
• When a cassette tape is played back
in the normal direction ( ), is
fast forward and is rewind.
• When the cassette tape is played
back in the opposite direction ( ),
is fast forward and is
rewind.
• You can perform the same operation
by pressing or .
Insert a cassette tape
with the side you want to
listen to facing up.
Cassette tape indicator
(The cassette tape indicator lights up while the cas-
sette tape is stopped. The cassette tape indicator
flashes while the cassette tape is being played back.)
Reverse mode
Cassette tape playback
direction ( : normal direc-
tion/ : opposite direction)
: For one return playback of both
sides.
: For repeated playback of both sides
(Playback continues until playback is
stopped.)
: For one-way playback of either side.
UX-QD70[UB]-04.fm Page 43 Friday, August 12, 2005 10:15 AM
To Next Page
Loading...
