60
English Editing MDs English
Editing MDs
Editing Tracks
Example: Dividing a tune into tune A and tune B
■ While the track you want to divide (track1 in
the example shown above) is being played
back
1 Press repeatedly to select
"DIVIDE?".
2 Press .
• You can also select the track number with
or or the number buttons.
Refer to "Using the number buttons"
( page 16).
3 Press to specify the dividing
point.
• This product repeatedly plays back the 4
seconds of sound immediately following the
dividing point.
• When the dividing point does not have to be
adjusted, proceed to step 5.
• When you want to adjust the dividing point,
proceed to step 4.
4 Press or .
• You can adjust the dividing point within the
range of -128 to +128 position (approxi-
mately -8 to +8 seconds in SP mode).
5 Press .
6 Press .
NOTE
• During editing, you can return to the previous step
by pressing . You can quit the editing opera-
tion by pressing .
• You cannot divide a track in an MD containing
254 or more tracks. When you press in step
3, "DISC FULL" appears.
•
When you divide a track that has a title, the title is
added to both divided tracks.
For the locations of remote control
buttons, refer to page 58.
Dividing a Track into Two
Tracks (DIVIDE)
Track
number
"POSIT." stands for "POSITION".
UX-QD70[UB]-05.fm Page 60 Tuesday, August 9, 2005 6:10 PM
To Next Page
Loading...
