Introduction
47
(Continued)
Listening to MDs
Press .
• Each time you press , the display
changes as follows.
■ While an MD is being played back
■ While an MD is stopped
1 Set the remote control mode
selector to AUDIO.
2 Press the number buttons ( -
or ) to select the track you
want to listen to.
• Refer to "Using the number buttons"
( page 16).
You can play back just the tracks from a group
which you want to listen to.
■ While an MD is stopped
1 Press repeatedly to select
"GROUP".
2 Press .
• Group 1 playback starts.
• If there is no group, "GROUP" disappears
and normal playback starts.
3 Press or to select a
group.
• When playback of all tracks in the selected
group finishes, playback automatically
stops.
While playback is stopped, press
repeatedly to select an item
other than "GROUP".
NOTE
• Ejecting the MD or turning off the main unit also
cancels group playback.
Changing the Display in the
Display Window
Specifying the Track
(Direct Track Selection)
Display while an MD is
being played back
( page 46)
Track title display
Group title display
Clock display
When no title has been
set to a track, "NO TR
TITLE" appears.
When the track being
played back does not
belong to a group, no
group title display
appears. When no title
has been set to a group,
"NO GR TITLE" appears.
Display while an MD is
stopped
( page 46)
Disc title display
Clock display
When no title has been
set to an MD, "NO
TITLE" appears.
Group Playback of an MD
Group indicator
Canceling group playback
UX-QD70[UB]-04.fm Page 47 Friday, August 12, 2005 11:17 AM
To Next Page
Loading...
