JVC videomovie GR-65 - VIEWFINDER INDICATIONS; Mode and Status Indicators; Data and Warning Indicators

ENGLISH
VIEWFINDER INDICATIONS
Focus mode Fading mode
| ee eee Camera is focused beyond EADER ....... Fade function is engaged.
subject —FApEF Ris rete Fading is being performed.
| laeraee prearnrarear Focus is correct Ko indication . . Fade function is not en-
EE nee Camera is focused in front of gaged.
ate subject
—PRa— 1. Low contrast warning
ae (auto/manual) Elapsed Time Indicator
No indication. .. . Auto-focus is operating
White balance mode setting
ce Daylight. Lithium battery warning
(ee ee Fluorescent lighting. PE cd Lithium battery
BRS sec cattle sabe Halogen or tungsten lighting. is exhausted, or
No indication... . Auto white balance is operat- ra not yet instatled.
ing.
$1000
1/1000-second shutter
mode is engaged
$500
1/500-second shutter
mode is engaged
$250
1/250-second shutter
mode is engaged
No indication
1/50-second (standard)
shutter mode is engaged
Date indications
Title Colour indications Time indications
. on BK .... Black 24 hour indications
Title
Page
indicator
WH
....
White
-.—.-.
.
Auto
Date
Rec
is
P1
....
First
page
YL
..
Yellow
engaged
.
P2 .... Second page CY . Cyan blue
P3.... Third page GR .... Green
MG .... Magenta
RD .... Red
BL .... Blue
Nis
~LIGHT~....... Low-light warning
7itN
Nl + ;
BATTERY Saree Low-battery warning
Operation mode
REC. oh cn be gies Recording is being performed
KV dev cee cee) FRCOTHNG SUNADY Mode 1s engaged
= REC oe Tape-end warning (blinking will begin a few minutes
"i
; before tape ends}
No
indication.
....
Stop,
Play
or
Rehearsal
mode
is
engaged
RECORDING OPERATIONS
Slide the POWER switch to ON.
Insert a video cassette correctly (with its safety
tab in place).
Press the REC Standby button. The unit enters
the Recording Standby mode.
Trigger alarm system
When the ALARM ON/OFF
switch is set to ON, an electronic
alarm beeps when the Recording
start/stop button is pressed to
begin recording.
The electronic alarm beeps twice
when the Recording start/stop
button is pressed for record
Pause. This alarm helps prevent
recording errors.
Elapsed time display
The accumulated recording time (elapsed time)
can be displayed on the viewfinder. *
1. Set the REC TIME ON/OFF switch to ON.
The recording time is displayed on the view-
finder screen.
2. If you wish to reset it to 00:00", press the
REC TIME RESET button.
Notes:
@When you wish to disengage the Elapsed
Time Display mode, set the REC TIME ON/
OFF switch to OFF.
®Unloading the cassette also resets the display to
00:00".
For full-auto operation, press the FULL AUTO
button.
For manual override, use the W. BALANCE and
FOCUS buttons.
Press the W. BALANCE button so that the re-
quired symbol appears on the viewfinder and on
the LCD.
4 : when the subject is illuminated by a halogen
or tungsten lamp.
:when the subject is illuminated by a fluores-
cent lamp.
: when you shoot in the daytime outdoors,
®When shooting under fluorescent light, always use
the fluorescent light setting in the manual white
balance mode for best results,
For manual focus, press the FOCUS button so that
MANUAL is shown on the LCD. A focus-aid in-
dicator will appear in the viewfinder. (See page 14.)
®fris control is always automatic, Therefore, possible
combinations of auto and manual functions are as
follows:
FUL!
FOCUS
Nese Rs BALANCE eee BALANCE
Prem
Auto Fowl a
Auto Auto Monae
®Be careful not to cover the white balance sensor
window, otherwise correct white balance will not be
obtained in the auto focus mode.
@For high-speed electronic shutter, see page 15.
Determine the focus and composition by re-
ferring to the viewfinder image. For zooming, see
page 18.
For date/time recording, see page 17.
ENGLISH