What to do if JVC Everio GZ-VX775 Camcorder connection gets disconnected?
If you're getting a 'UNABLE TO CONNECT' message or your JVC Camcorder connection keeps dropping, it might be due to distance, obstacles, or interference from other wireless devices. Try moving closer to the camera in a location with a strong signal. If that doesn't work, try restarting your smartphone or computer.
Why I am unable to browse the internet when connected to my JVC Camcorder?
If you can't access the internet on your computer while connected to the JVC Camcorder, it's likely because the camera is acting as an access point. Try reconnecting your computer to your usual wireless LAN router. Also, the computer (or smartphone) cannot be connected to multiple access points at the same time, so remove the camera connection from the computer if it connects unintentionally. Alternatively, stop direct monitoring on the camera.
Why is video or audio interrupted or delayed on my JVC Everio GZ-VX775?
If your JVC Camcorder video or audio is interrupted or delayed, the network speed might be slow. Try moving to a location with better signal strength. If the stream format is set to “Full HD”, change to “SD” or “Motion-JPEG” and try again. If lagging is severe, reload the screen regularly.
How to find URL to access JVC Everio GZ-VX775 Camcorder from a web browser?
If you're unsure of the URL to use for accessing your JVC Camcorder from a web browser, start outside monitoring on the camera. Then, tap “CAMERA NETWORK INFO.” on the camera’s screen and enter the address shown as “URL(LAN):” into your web browser.
Why does my JVC Camcorder turn off automatically?
If the JVC Camcorder turns off automatically, this is a normal function to prevent the device from being left on for extended periods. The unit will turn off automatically after 10 days of continuous usage.
What to do if JVC Everio GZ-VX775 is unable to find an access point?
If you're unable to find an access point (wireless LAN router) with your JVC Camcorder, check if the distance from the access point is too far or if there are any obstructions. If the access point is in SSID stealth mode, either perform manual registration or temporarily disable the stealth mode before registering. Note that in environments with multiple access points, finding the desired one through searching might be difficult.
Why is my JVC Everio GZ-VX775 unable to send e-mails?
If you're unable to send e-mails from your JVC Camcorder, verify that the e-mail server settings, sender's e-mail address settings, username, and password are all correct. Also, some free e-mail services may have default SMTP settings that prevent sending e-mails; change the SMTP settings to allow sending before use.
General| Sensor Type | CMOS |
|---|---|
| Sensor Size | 1/2.3 inch |
| Video Resolution | 1920 x 1080 (Full HD) |
| Optical Zoom | 10x |
| Digital Zoom | 200x |
| Image Stabilization | Optical |
| Display | LCD |
| Touchscreen | Yes |
| Storage | SD/SDHC/SDXC |
| Video Format | AVCHD, MP4 |
| Audio Format | Dolby Digital (2ch) |
| HDMI Output | Yes |
| Battery Type | Lithium-ion |
| HD Recording | Yes |
| Optical Sensor Resolution | 8.29 MP |
| USB Interface | Yes |
| LCD Screen Resolution | 460, 800 dots |
To Next Page
