JVC Everio GZ-VX775 - Setting the Password (out MONITORING SET); Setting the Upnp of this Camera (out MONITORING SET)

Setting the Password (OUT MONITORING SET)
Sets the password to access the camera. (Not more than 8 characters)
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (
Q
) in the shortcut menu.
(Operation on this camera)
.
3
Tap “OUT MONITORING SET”.
(Operation on this camera)
.
4
Tap “PASSWORD”.
(Operation on this camera)
.
5
Enter the password.
(Operation on this camera)
.
0
Tap on the on-screen keyboard to enter characters. The character
changes with every tap.
0
Tap “DELETE” to delete a character.
0
Tap “CANCEL” to exit.
0
Tap “A/a/1” to select character input type from upper case letter, lower
case letter, and number.
0
Tap E or F to move one space to the left or right.
0
After setting, tap “SET”.
Setting the UPnP of this Camera (OUT MONITORING SET)
Sets the UPnP of the camera.
1
Tap “MENU”.
(Operation on this camera)
.
0
The shortcut menu appears.
2
Tap “Wi-Fi” (
Q
) in the shortcut menu.
(Operation on this camera)
.
3
Tap “OUT MONITORING SET”.
(Operation on this camera)
.
4
Tap “UPnP”.
(Operation on this camera)
.
0
Tap “ON” or “OFF”.
0
Select “ON” to enable UPnP.
0
Select “OFF” to disable UPnP.
0
After setting, tap “SET”.
Using Wi-Fi
28