To Next PageTo Next Page
Need help?Do you have a question about the JVC XL-R5000BK and is the answer not in the manual?
General| Type | CD Recorder |
|---|---|
| Playback Media | CD, CD-R, CD-RW |
| Sampling Frequency | 44.1 kHz |
| Frequency Response | 2 Hz - 20 kHz |
| Analog Inputs | RCA |
| Analog Outputs | RCA |
| Remote Control | Yes |
| Recording Media | CD-R |
| Recording Format | Digital Audio (CD-DA) |
| Playback Format | CD-DA |
| Digital Inputs | Optical, Coaxial |
| Digital Outputs | Optical, Coaxial |
| Analog Output | Yes |
| Headphone Output | Yes |
General safety guidelines for electrical shocks, fire, and unit damage.
Proper placement and environmental conditions for the unit.
Instructions for handling and storing CDs to prevent damage.
Connecting audio sources using analog pin cables.
Setting the MODE switch for COMPU LINK function compatibility.
Steps for connecting and using optical digital cables properly.
Identification and function of buttons and indicators on the main unit.
Buttons for CD control, remote sensor, and clock/timer functions.
Buttons for playing, pausing, stopping, skipping, and searching tracks.
Buttons for starting recording, editing, and synchronizing functions.
Buttons for disc selection, modes, power, and system settings.
Steps for opening the battery compartment and inserting batteries.
Guidelines for optimal remote control operation and basic troubleshooting.
Instructions for powering the unit on, off, or placing it in standby mode.
How to activate the unit by pressing function-specific buttons.
Continuous playback, starting, and stopping CDs.
Playing CD-Rs/RWs and using the remote for playback.
Direct track selection and forward/reverse search.
Skipping tracks and activating repeat playback modes.
Random playback, disc lock, and pitch control.
How to create, clear, change, or check programmed track sequences.
Notes, procedures, and available recording types.
How to connect a microphone for recording input.
Setting recording levels, sources, silence, and track marking.
Manual track marking and synchronized recording from CDs.
How to perform listening edit recording for specific tracks.
How to create a custom recording program from multiple tracks.
Options for CD changer to CDR recording and high-speed setup.
How to set the unit to record 2 seconds of silence between tracks.
Specific notes and cautions for recording external sources.
Adjusting signal levels and balance for mixed input recording.
How to apply a skip marker to a recorded track on CD-R/RW.
How to erase specific tracks from a recorded CD-RW.
How to erase all data from a CD-RW disc.
Setting synchronized start/stop recording for single digital tracks.
Instructions for setting the unit's internal clock for the first time.
Details on automatic power and source selection features.
Explanations of messages related to CD playback problems.
Explanations of messages related to CDR recording and playback.
Further messages related to CD-ROM, disc full, and recording errors.
Explanation of the Serial Copy Management System and its restrictions.
Troubleshooting steps for CD playback problems.
Troubleshooting steps for CDR recording and playback issues.
Troubleshooting steps for remote control and timer functions.
Technical specifications for the CD player and CDR sections.
Common specifications and list of included accessories.
