JVC XT-G70RBK User Manual

LL-L (68v0% ON)
PRGM Edit or Multi Edit
6666666666
4. Press the SIDE A/B button to set the tape length.
When you have selected the Al Edit or Auto Edit
‘The tracks which can fit on side A and B will be automatically selected in accordance with
the specified tape length. By repeatedly pressing the SIDE A/B button you can check which
tracks have been programmed for which side of the tape.
When you have selected the PRGM Edit
Select the track numbers for side A with the 10 keys.
Press the SIDE A/B button.
Select the track number for side B.
When you have selected the Multi Edit
Select the track numbers from the first disc with the 10 keys.
When you have selected the Multi Edit, you can select tracks from different discs (up to 10
tracks from one disc).
5. Put a tape in deck B and set the REVERSE MODE selector to the > position.
6. Press the FUZZY LOGIC CD REC DIRECT button.
After a blank of 10 seconds is made at the beginning of the tape, the recording starts. If the
inserted tape has not been rewound, it will be rewound automatically before the recording
begins.
7. When you have selected the Multi Edit
Deck B enters recording pause mode, when the first disc play ends.
Change the disc and select the tracks again, then press the FUZZY LOGIC CD REC DIRECT
button. If you want to record on side B, press the SIDE A/B button and repeat this procedure.
To stop the recording
Press the STOP/CLEAR i button.
To delete the last selected track (only for PRGM Edit and Multi Edit)
Press the CANCEL button in stop mode. Each time you press the button, the last selection will
be deleted.
Page 28
Using the Timers
The timers let you contro! recording and playing functions automatically.
—[a~y-
Recording Timer—Unattended recording of radio broadcasts. You can set the starting time and recording duration.
Wake Up Timer/Steep Timer—Wake up to music from any source. Fall asleep and have your XT-G70RBK tum off automatically after a certain
length of time.
Once Timer/Daily Timer—You can program the Unit to come on playing a source at a particular time, and then shut off at a special time.
Setting the Clock
1.
2.
3.
< ean
4,
5.
Page 29
The timers depend on the clock: If the clock is right, the timers will work as you expect, but if the
time is incorrect on the clock then the timers will also be incorrect. So, let's set the clock first.
Press the CLOCK ADJ. button.
Set the hour by pressing the TUNING/TIMER/DIMMER/CHARACTER <or > button.
Each time you press it, the hour advances by one. Hold the button down, and the clock will
advance one hour at a time.
Press the MEMORY button, when the correct hour is showing on the display.
The hour is set.
Set the minutes by pressing the TUNING/TIMER/DIMMER/CHARACTER < or >
button.
Each time you press it the minutes advance by one. Hold the button down, and the minutes
advance in 10 minute increments .
e
Press (he MEMORY button again.
‘The minute is set, and the clock is set and starts from zero second.
If the clock has not been set or if there has been a power outrage, “0:00” will
be displayed and “CLOCK” will blink.
If there is a power failure, the clock loses its setting, the display shows “0:00,”
and it must be reset.
You can set the clock and the Timers whenever the XT-G70RBK is turned
off, but still connected to a live power source.
MAYOLO-LX

JVC XT-G70RBK Specifications

General

Brand	JVC
Model	XT-G70RBK
Category	Stereo System
Language	English