Basic operations
19
Basic operations
EnglishEnglish
English
English
7
During playback
Press 4 or ¢.
Press
4
to locate the beginning of the current chapter, title, or track, and press
¢
to locate the beginning of the
next chapter, title, or track.
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position next
time you press
3
.
1
Set the RESUME setting on the SYSTEM page of the preference display to ON.
(See page 38 for details about how to set.)
2
At the position you want to interrupt playback, press 7, or press STANDBY /ON on the remote
control or on the front panel.
The unit memorizes the interrupted position.
If you interrupt playback by pressing
7
in step 2 above and then turn off the power, the memory is not cleared.
7
While the disc you interrupt playback last time is still in the disc tray
Press 3.
The unit starts playback from the position where you interrupted playback last time.
To clear the resume position memory
Carry out one of the followings.
*Take out the disc from the tray
*Press
7
while stopped
*Turn on the unit by pressing STANDBY /ON (on the remote control) or (on the front panel).
To locate the beginning of the scene or song
NOTE
When you play a Video CD disc with the PBC function or a D VD VIDEO disc, the unit may locate a different place, but it will gen-
erally locate the beginning of the title or c hapter or track.
To memorize the interrupted position
To resume playback
NOTES
The resume function does not work with Audio C D discs.
The resume function does not work if
RESUME on the
SYSTEM page of the preference display is set to
OFF.
In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume
point you stored.
The resume function does not work in the program or random mode.
6(1*ERRN 3DJH 7KXUVGD\ -DQXDU\ $0
To Next Page
Loading...
