13
Getting started
EnglishEnglish
English
English
Getting started
Connections
*In the following description, TV may be substituted with monitor or projector.
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Do not connect the AC power cord until all other connections have been made.
Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
You can enjoy using the unit by simply connectin g it to a TV. To improve audio sound quality, connect the audio outputs
to your separate audio equipment. (See the following pages.)
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable
(optional) in addition to the (standard) video connection to get better picture quality.
Before making any connections
To connect to a TV
NOTES
Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
Connect the unit to a PAL television. Do not connect the unit to an NTSC television.
DIGITAL OUT
PCM / STREAM
COAXIAL
AUDIO OUT
S-VIDEO VIDEO
RIGHT LEFT
AV COMPU LINK
OPTICAL
VIDEO
AUDIO
RIGHT
LEFT
S-VIDEO
IN
VIDEO OUT
T V
Yellow
Audio/Video cable
(supplied)
White
Red
S-video cable
(not supplied)
The unit
Yellow
White
Red
VIDEO OUT
COMP.Y/C
AV
3HQJIP 3DJH )ULGD\ -DQXDU\ $0
To Next Page
Loading...
