JVC XV-S42SL - Page 42

Initial setting
40
Initial settings
You can change the Parental lock settings later.
7 While a DVD V IDEO d isc is stop ped or no dis c i s in ser t ed
1
Press ENTER while holding down 7 on the
remote control unit.
The Parental Lock on-
screen display appears
on the TV screen.
points [P A SSWORD].
2
Enter your current 4-digit password using the
numeric buttons (0 to 9) and press ENTER.
moves to [Country Code] if you enter the
correct password.
If you enter the wrong password, WRONG!
RETRY... appears on the TV screen, and you
cannot go to next step.
3
To change the country code, use CURSOR 2/
3 to select the desired country code and
press ENTER.
moves to [Set Level].
When you change the country code, you must
select the parental level.
4
To change the set level, use CURSOR 2/3 to
select the desired level while points [Set
Level], and then press ENTER.
moves to [PASSWORD].
5
Enter the password using the numeric buttons
(0 to 9) and press ENTER.
moves to [EXIT].
The password entered in the above step becomes
the new password. If you do not change the
password, enter the same password a s in the step 2.
Even if you want to change only the country code
and/or parental level, do not forget to enter the
password after changing the country code and/or
parental level. Otherwise, the new country code
and/or parental level will not become effective.
Pressing ENTER again returns to the opening dis play .
To change the settings [PARENTAL
LOCK]
OPEN
/CLOSE
STANDBY/ON
PLAY
MODE
123
56
89
0
+
1010
7
4
3D
PHONIC
CANCEL
SUBTITLEANGLE AUDIO
THEATER
POSITION
DIGEST
PREVIOUS
NEXT
CLEAR
STROBE
SLOW
+
SLOW
–
TITLE
MENU
CHOICE
ENTER
RM-SXVB40A REMOTE CONTROL
SELECT
DISPLAY
ZOOM
RETURN
4
¢
1
¡
5
5
5
∞
7
8
3
2-1, 5-1
1, 2-2, 3-2,
4
-2, 5-2
1
3
-1, 4-1
Country Code
GB
8
EXIT
Set Level
PASSWORD
CURRENT PASSWORD? ··· PRESS 0~9 KEY
PARENTAL LOCK
- - - -
NOTES
 When you enter the wrong password more than 3 times
in step 2 above, moves to [EXIT] automatically and
CURSOR 5 / ° does not work.
 If you forget your password in step 2
Enter 8888.
6(1*ERRN 3DJH  7KXUVGD\ -DQXDU\    $0
All manuals and user guides at all-guides.com