THE EDIT SCREEN:
From the controller home page, when you tap the pencil icon in the upper right corner you
can edit controller name, add a security key for each device, geolocate the device using a
physical address or the GPS in your Smartphone or Tablet, change the name of stations,
view the default name and view software version information. Additional features include:
Retrieve the controller’s data: If you have made program changes that you have not
transmitted to the device, you can tap Retrieve the controller’s data to void the changes
you have made (but not transmitted to the controller).
Erase programs and durations: This resets the controller to default settings. If there is a
passkey on the device, you will be required to type it in prior to restoring to factory defaults.
Create a back-up/Restore from back up: See online account set-up on page 08.
05
To Next Page
Loading...
Need help?
General
