4
Mounting and Powering
the Platinum100
Mounting Instructions
To help ensure that your K40 functions properly and offers
maximum protection, please follow these mounting instructions:
1. Clean the area of the windshield where the K40 will
be mounted.*
2. Attach the supplied Windshield Mount near the center of
your vehicle’s windshield by latching it firmly with the tension
lever.
a. Slide unit onto the bracket until you hear a “click” to
complete the mounting.
b. Once mounted, the bracket can be leveled by adjust-
ing the control dial.
c. Do not mount behind windshield wipers or any other
metal obstructions.
*IMPORTANT NOTE:
Some windshields include a metallic coating that can
significantly affect reception of radar signals. Consult with your dealer or
check your vehicle’s owner‘s manual to determine if your windshield has
such a coating.
Power Connection
The K40 comes with two power cords: one 3.5’ coiled cord
and one 9.5’ straight cord that can be used for hardwire in-
stallation. You can use either cord based on your visual
preference and vehicle power outlet locations.
1. Plug the small end of the supplied Power Cord into the
Power Input Jack on the right side of the Platinum100.
2. Plug the large end of the Power Cord into your vehicle’s
12V outlet.
3. Power on by pressing and releasing the button.
QUIET
RIDE
PWR
To Next Page
Loading...