K40 ELECTRONICS Platinum 100 - Receiving Laser Alerts and Defuser Features; Laser Alert Sequence and Display; Laser Defuser Compatibility and Settings

Laser Alert Sequence
When the Platinum100 detects a laser signal:
• The OLED display shows LASER and reports your speed.
NOTE: Unlike radar, signal strength from laser remains constant.
• A voice announces, “Laser” (this assumes the factory
default “Voice On” setting has not been changed).
• You will then hear a distinctive and urgent audio tone.
Laser Defuser Compatible (sold separately)
Externally mounted K40 Laser Defuser transponders can con-
nect to the Platinum100 to combat police laser guns. Contact
your dealer for details.
Laser Defuser Settings (if equipped)
Optional Laser Defuser(s) can be configured to one of three
operational settings in the Menu (page 23):
7
Laser Alert Example:
Constant
Transmit
Defuser
Settings
Description
Recommended Use
For as long as the Laser
Defuser is receiving a police
laser gun signal, it will con-
tinuously transmit back to
the gun. This is the factory
default setting.
Alert Tone: standard laser
alert tone.
•Gives the driver more time
to decelerate.
•Higher potential for jam-
ming all the way to the
laser gun location.
(continued on following page)
M-MUTE
QR 20
40
LASER